Owner's manual

Manual del Usuario / aero 20A / User’s Manual
CHANGE OF CONFIGURATION (reset)
The unit allows to change some default factory settings using the controls in the amplifier´s panel. The
firmware which is described here is the 1.20 version.
TM
However, gain and delay only can be changed with DASnet .
To re-establish the default factory settings (Number of units/Throw/gain/delay...) without using DASnet the
system has to be switched ON while pressing the Throw button.
By doing this the cabinet will be set up with the Number of units correction to 1 unit and the Throw to MID.
13
D.A.S. AUDIO S.A. (Valencia) MADE IN SPAIN
SIGNAL INPUT
IDENTIFY/COMMS
THROW
LOOP THRU
LONG
MID
SHORT
ON/PROTECT
SIGNAL/
LIMIT
NUMBER OF UNITS
16
8
4
2
12
6
3
1
20
CAUTION
DO NOT EXPOSE THIS EQUIPMENT
TO RAIN OR MOISTURE
RISK OF ELECTRIC SHOCK
DO NOT OPEN
N1918
IN OUT
NUMBER OF UNITS
UNIT NAME STAGE / VENUE
THROW
115/230 V~ 50/60Hz 620W
AC INPUT
MAX. 5@230V / 2@115V UNITS AERO 20A
AC OUTPUT
ID DASNET
step 1
hold
pressed
step 2
turn the
PowerCon