Manual

INTRODUCTION
6
Manual del Usuario / aero 40A / User’s Manual
- Lates generation of AD/DA converters.
TM
- Remote monitoring and control via DASnet
- Newly developed high frequency waveguides.
- Higher SPL and increased power handling.
- New rigging system for improved ease of use and safety.
TM
- Advanced Line Array System (ALAS ).
- Powered three-way configuration.
- 4000 Wpeak Class D power amplifier.
- Powerfull DSP with Brick wall FIR Filters.
- Full limiting and protection features.
The aero 40A is a 3-way powered line array system which incorporates connectivity for remote monitoring
TM
and control. The unique configuration of the aero 40A Advanced Line Array System (ALAS ) incorporates a
rear-loaded 12” transducer in a bass-horn configuration for low-end reproduction. The mid-range is handled
by a new 8” transducer developed specifically for the aero 40A. High frequency reproduction relies on two
D.A.S. M-75N compression drivers attached to a new BPS-2912 waveguide.
Power for the aero40A is provided by a package of integrated electronics that includes a new 2.000 W
(4.000 Wpeak) amplifier, advanced digital signal processing and connectivity for remote system management.
The three channel, high efficiency Class D amplifier design is equipped with a switch mode power supply
(SMPS) and a comprehensive protection package for both the amplifier as well as the components. Channel
two the mid-range with channel three powering the high frequency drivers.
The aero 40A incorporates the latest in digital signal processors. Brick wall FIR filters have been used to
provide perfect alignment between ways achieving exceptionally uniform coverage all the way down the
crossover point. Top-of-the-line AD/DA converters have been employed allowing for significant improvements
in dynamics, lower distortion and ultra-low noise levels.
TM
Remote monitoring and control is provided by way of DASnet , the audio management application for
TM
D.A.S. powered cabinets and processors. The DASnet software offers users instant and intuitive view of the
system status as well as control over the range of parameters of a single cabinet or a network of them.
The aero 40A enclosure is brilliant in design. Constructed using birch plywood and finished with the ISO-
Flex black paint offers excellent protection and durability. Three individual assemblies comprising the high
frequency waveguide, the horn device for 8” mid-range and the carrier of the 12” woofer are made from
injection molded aluminum and attached to the front of the cabinet. A two-piece injected aluminum heat sink
housing the amplifier and related electronics is attached to the rear of the cabinet.
A robust steel grille with a powder coat finish has been used to protect the components. Stainless steel
has been employed to fasteners and parts of the new rigging system. The captive rigging system has been
designed to provide ease-of-use, safe rigging and precise aiming. Using captive links and quick-release pins,
the spring-loaded links remain positioned while rigging and prevent rattling during operation.
Features