User Manual

A50rack - 6
LM-26 Modules will be named as follows:
A50Vx.y LT
A50Vx.y MT
A50Vx.y ST
Frame presets will be named as:
A50Vx.y LT-MT (in A for LT, in B for MT)
A50Vx.y MT-MT
A50Vx.y MT-ST
A50Vx.y LT-ST
Mid Throw Long Throw
Mid ThrowLong Throw
Mid ThrowMid Throw
Short Throw Short Throw
- To recall a frame preset using the front panel go to menu--> enter--> frame preset --> enter --> select the memory
A50x.y MT-ST -->recall
- To load a module (csm format) in the DSP using the Lake Controller software:
Go to Module Menu--> select recall a module
Select the desired module on module A (LT/MT/ST)--> recall --> Repeat the same procedure on Module B
- Once the two modules have been recalled (in this case LT and MT) the user should store them in the processor as
system presets. To do it go to System Store / Recall folder --> System presets --> tap on both modules--> store with
new name: A50V5.5 LT -MT