User Manual

AX-AERO48 (AX-AERO38)
1
2
3
4
5
6
Quick release pin must be
inserted thru the slot of G2A48.
3y4
AERO-38
Once the boxes have been joined, the front
dolly panels can be removed. The next boxes should
be attached “one by one” using the methods
described. Finally, the array should be hoisted to the
correct height and secured with slings to avoid
swinging. This method is more time consuming than
assembling an array by the “all at once” procedure,
but is appropriate for situations due to a lack of space
in which to array the system. During the process, the
safety pins should be checked making sure they are
secured correctly. Once the complete array has been
lifted into place, additional slings should be attached
tosecurethearrayandavoidswinging.
AERO-182 systems can be flown one by one
asdescribedpreviously!!.
4.4 ASSEMBLING AN ARRAY USING
THE PL-38 PLATFORM
The PL-38 platform can be used to easily
transport AERO-38 units to the assembling area. To
use this method of assembling and hoisting the array,
there must be enough space to permit linking all the
boxesfromthefrontofthetherigginghardware.
The first step will be to attach the AX-
AERO48 or AX-AERO38 grid and the 2 hoists. Once
this has been accomplished, the grid structure can be
placed in a vertical position by lifting the rear hoist and
lowering the front hoist so thatthe rear of the grid ison
top and the front of the grid at the bottom, ready to
receivethefirstbox.
Rigging points
The next step is to attach the first unit to the
grid by introducing the G1A48 and G2A48 guides in
the receiving points of the grid structure and assuring
them with the (6) safety pins. The safety pins should
be inserted in the slot of the G2A48. It is very
important to make sure that the pins have been
insertedandlockedcorrectly.
58Aero-38 Manual del usuario/ User´s manual
Lift the box and introduce the
G1A48 guides securing them
with the safety pins.