User Manual

While the array assembly descends, the
rear of the enclosures will come together, at that
moment, the safety pins which hold the G2A48
guides in place should be removed. Once removed,
the guides should be swung back into the box they
belong to. Finally, the boxes should be totally
detached from one another by releasing the G1A48
guide.
To lower the system, both hoists should be
used until the lowest box is about 1 meter from the
ground. From there on, only the front hoist should be
used so that the array assembly begins to lean
forward, at the same time, the PL-38 platforms should
be reattached. When the wheels of the lowest
enclosure are firmly on the ground, the array
assemblycannowbeloweredusingtherearhoist.
4.5 ASSEMBLING AN ARRAY
USING THE PLATFORM PL-48S
The PL-48S platform can be used to easily
transport 3/4 units of the AERO-38; in both arc shape
orstackedontheplatform.
The PL-48S platform has two types of
moving pieces. One of them is fixed (PL-48S_2) and
can only be swung around, the other is free (PL-
48S_1) and is joined to the platformby way of a safety
pin. The smaller piece PL-48S_1 attaches to the front
enclosure hardware and the larger PL-48S_1 attaches
totheback:
PL-48S_2
PL-48S_1
To place eight AERO-38 units on 2 PL-48S,
the first step would be to suspend them all, and then
lower the array assembly onto the platforms in groups
offour.
Aero-38 Manual del usuario/ User´s manual
A) Cabinets splayed in arc (MAX. 4 units):
The PL-48S platform can be used to
transport boxes forming a vertical arc, ready to be
flownorsimplystacked.
Either way, due to the weight of the boxes, it
isrecommended that for the first time, the enclosures
be placed on the platform from a flown position. In
other words, the array should be suspended (either
oneby one or using the PL-48S)andthenloweredonto
thePL-48Singroups.
Lower the array until the lowest box is about
15cm(aprox.6in.)abovethePL-48Splatform.
61
MAX. 4
units
Last cabinet of the array