User Manual

AERO-38 boxes can be easily transported in

groups of four when stacked on the PL-48S platform.

This arrangement is also useful and saves time when

setting up a cluster. Let us see what would the

procedurebewhenflyingasixboxcluster.

After the AX-AERO48 grid has been

attached to the motors, it should be lifted at about

1.8m (5.5 ft) from the ground. Now the platform

containing the first three stacked AERO-38 boxes can

berolledunderthegrid.

In order to attach the box on top to the grid,

front guides G1A48 and rear guides G2A48 must be

swung (2) and inserted into the AX-AERO48 grid

receiving points. Once this has been done, detach the

6 safety pins from their receptacles and secure the

boxtothegrid.

Once G1A48, G2A48 of the top cabinet have

been secured (3) to the grid, rotate

5 . See next page.

the G2A48 pieces

( ), fit them into the upper box rigging hardware and

securethemwiththesafetypins( )

Whenever a safety pin is inserted, it is

always advisable to make sure it has been correctly

lockedbypullingoutward.

4.6 ASSEMBLING A CLUSTER

USING THE PL-48S PLATFORM

70Aero-38 Manual del usuario/ User´s manual