User Manual

D) PL-48S
The PL-48S platform is a valuable accessory
which allows up to 4 AERO-38 units to be transported
in a stacked position, ready to be flown. The PL-48S is
made from steel and has 4 heavy duty casters with
lockingbrakes.
Aero-38 Manual del usuario/ User´s manual 46
PL-48S
AX-COMBO
AERO-38
AERO-28
AX-AERO48
E) AX-COMBO
The AX-COMBO is a rigging adapter to be
used when Aero-28 units are needed to be flown
under AERO-38 units as dowfill systems. Maximum 6
CA-28A units and 8 CA-28/CA-28B units can be flown
from this rigging grid. The AX-COMBO includes front
and rear steel guides which permit variation of the
angle between it and the last AERO-38 cabinet in the
cluster. Angles vary from 0.0º to 9.6º.
AX-COMBO
G2A48
G1A48
G2A48
Weight
Dimensions: 143x60x5cm (56.3x23.6x2in)
: 16.5Kg (36.3 lbs)
G1A48
The AX-COMBO is joined to the last AERO-
38 cabinet using G1A48 and G2A48 included steel
guides and 6 quick release pins. The angle depends on
the hole of the rigging structures where the pins are
inserted, through the slots of G2A48. The first AERO-
28 unit is joined to the AX-COMBO using its G1A and
G2Aincludedcamlinks.
On the next page is a table with the angles between
both systems depending on the hole where the quick
releasepinisbeinginserted.