User guide

Page 16 AudioCore Version 8.40
AudioCore Version 8.40AudioCore Version 8.40
AudioCore Version 8.40
Saving and restoring your system’s settings
If you want to store a copy of your system’s current configuration, choose File  Save As from the File menu.
This file will store all the current settings of all the units, all the memories uploaded, the units’ names (inputs, output,
device name), and the device window positions (including if they were minimised or not).
To send a pre-configured set-up to a chain of units, select File  Open and chose the file you require.
Next, press the ‘On-line’ button and choose “Send All Settings Including
Memories”, or “Send Current Settings Only” if you just want to update the
current audio paths.
File Handling Options
AudioCore
AudioCoreAudioCore
AudioCore can be set to automatically save your settings to a file when the software is closed, in case you forget.
This is selected through File  Options, and then choosing the
“Files” tab so show the window shown to the left.
Checking the “Auto Save File” will save the current settings with the
filename shown on the title bar
Checking the “Auto Load Last File” will ensure that the last file used will be automatically opened when the software is
next started. The settings will NOT automatically be sent to the units – this has to be initiated manually by going on-line as
normal.