User guide

Page 20 AudioCore Version 8.40
AudioCore Version 8.40AudioCore Version 8.40
AudioCore Version 8.40
Configuring a Unit
The configurations available will depend on the type of unit selected. In the case of a DP448 this screen is equivalent to
the ‘Design a Xover’ menu within the unit itself, choosing the type of crossover to implement, and various basic options
relating to this.
These names and the device configuration may be changed at any
time by selecting the device in question (click on it’s device
window) and then Device  Modify from the menu bar, or by
right clicking on the selected devices window and choosing
“Modify”.
This window also allows the device itself, and all the inputs
and outputs on that device, to be named. These are used
throughout the software – on the actual device window
(which appears after clicking ‘OK’) and on the editing screens.
It is accessed by clicking on the ‘Names’ tab at the top of the
window in the case of 4 Series units, or the “Input & Output
Labels” tab for DP224/6/6i.
Note that, although the text boxes are limited to 8 characters
to ensure that they are to be completely visible on all screens
of the unit during editing. Try to include identifiers such as ‘L’
or ‘R’ or numbers at the start rather than the end of the
name.