User guide

Page 22 AudioCore Version 8.40
AudioCore Version 8.40AudioCore Version 8.40
AudioCore Version 8.40
Editing Input and Output Gains
The inputs and outputs on
the selected devices are all
simultaneously available for
editing where gains are
concerned. The inputs have
mute buttons (active when
the button is red), whilst the
outputs additionally feature
phase reverse buttons.
Note that if there are inputs
that have not been routed to
any outputs their respective
gain controls and meters will
be hidden.
Points to note about the operation of this screen are:
Clicking on the slider track, rather than the knob will change the gain in 1dB steps.
Clicking on the text box below the slider allows direct numerical entry. Press ENTER to accept the new value. To reject
a value typed in accidentally, delete all text from the box and click on any other box. The gain will revert to that shown by
the slider.
Mutes and output phase reverse switches remain un-ganged regardless of the ganging of the gain controls. The ganging
may be switched off/on by selecting the device in question (click on its device window) and then Device  Modify from
the menu bar or right clicking on the background of the device window.
The keyboard may also be used to navigate around this screen.
Accesses gain sliders/mutes/phase reverse in turn per
channel.
Toggles any selection (mute or phase reverse).
Either adjusts gain up in 0.1dB steps.
Either adjusts gain down in 0.1dB steps.
Adjusts gain up in 1dB steps.
Adjusts gain down in 1dB steps.