User guide

Page 42 AudioCore Version 8.40
AudioCore Version 8.40AudioCore Version 8.40
AudioCore Version 8.40
Array Control Options
As mentioned earlier, ‘SETUP’ and ‘LIVE’ modes may be thought of as equivalent to supervisor and user lock levels in the
normal Audiocore software.
The options screen above, displayed by pressing the ‘Options’ button on the master window, allows different access rights
to be granted to the ‘LIVE’ and ‘SETUP’ modes so that, for example, once the system is running in a show situation, it is
not possible to access the ‘MUTE ALL’ button on the zone control window (‘Zone Mute All Button Active {Control
Page}’ in the Live Mode Options section.
Also on the master window are three buttons which affect the presentation of the zone
control windows. These are the row of three labelled ‘Slider’, ‘Up/Dn’ and ‘Meters’
respectively. Their purpose is to allow the zone gain and metering to be presented in
different ways, according to the application and computer controlling the system.
The ‘Slider’ option displays sliders and smaller meters on the zone control screen, as previously seen.
The ‘Up/Dn’ option replaces the slider with a pair of spin buttons. This might be the
best option if the computer has a touch screen, or is operating without a mouse.
Finally, the ‘Meters’ option dispenses with the gain controls entirely,
displaying just a meter. The scale of the fader has been deliberately
left visible, as it is also the scaling for the metering level.