User guide

Page 46 AudioCore Version 8.40
AudioCore Version 8.40AudioCore Version 8.40
AudioCore Version 8.40
Refresh Button
The refresh button, found on the toolbar at the top of the screen, allows the software to pull in all the current settings of
the connected settings at any time, without having to go off-line and on-line again.
Pressing this button (which will be greyed out until the system is on-line) will display a
window showing the brief process of re-synchronising the system. This is useful when there
may have been local changes, made via a front panel, whilst the system was being controlled from the PC, ensuring the
computer knows exactly how the units are set up at all times.
SiDD Access Button
If you are concurrently running SiDD PC control software at the same time as AudioCore, the two packages can share
COM port, which will automatically be assigned when the appropriate software is brought into focus.
Pressing this button will automatically switch over to the SiDD software and reassign the COM port.
The complementary button exists in SiDD’s software.
These buttons will not be available unless both packages are actually running at the same time, not just installed.