User guide

Page 54 AudioCore Version 8.40
AudioCore Version 8.40AudioCore Version 8.40
AudioCore Version 8.40
Set the Netgear Card IP Address
Whilst Windows will automatically assign the Wi-Fi card an IP address, our experience has shown that this must be
changed manually to ensure correct operation. Here’s what to do…
From your Windows desktop, click start, then ‘Control Panel’ to display…
The ‘Network
Connections’ icon is
already highlighted here.
Double click on the
‘Network Connections’
icon to display the list of
network connections in
place on the computer.
In this list should be the network associated with the Netgear wireless card – it is highlighted here.
Make sure you change the settings on the Netgear Card – check the “Device Name” column for “Netgear 108 Mbps
Wireless PC Card” as shown above. Right click on this and select ‘Properties’ to see how the card is set up – as shown on
the next page…