User guide

AudioCore Version 8.40
AudioCore Version 8.40AudioCore Version 8.40
AudioCore Version 8.40 Page 55
The item listed (and highlighted) here that needs to be checked is the
‘Internet Protocol’ item – select it and then click on the ‘Properties’
button to reveal the window shown below, which gives access to the
actual IP address etc. used by the Wi-Fi card.
Make sure that ‘Use the following IP address’ is selected
and the IP address is similar to that shown (i.e. starting with
192.168.). If it is an auto-allocated address (typically of the
format 169.202.x.x), change it to one beginning 192.168,
but NOT ending with 224.226 as that’s the ADDRESS of the
Wiser!
Set the ‘Subnet Mask’ to 255.255.0.0.
Do NOT change the Default Gateway
setting (normally blank)!