User guide

Page 60 AudioCore Version 8.40
AudioCore Version 8.40AudioCore Version 8.40
AudioCore Version 8.40
WEP Encrypt: 64Bit*
WEP Encrypt: 64Bit*WEP Encrypt: 64Bit*
WEP Encrypt: 64Bit*
Choose between ‘None’, ’64 Bit’ , and ‘128 Bit’ using the FREQ control.
“Wired Equivalent Privacy” or WEP encryption is a method of making a wireless network more secure by encrypting the
data transmitted using a ‘Key’ that both ends of the system must know to access the data. Working out what IP addresses
are available on a WLAN is relatively simple, so allowing anyone in the vicinity to potentially gain control over any
connected devices. Using encryption, this become much more unlikely to happen as decoding the ‘Key’ is very difficult.
We would recommend using 64 or 128 bit (128 being more secure) encryption. If you have the encryption enabled, then
the next option will be to choose the ‘Key’, otherwise the Wizard will finish.
KEY1: 0123456789
KEY1: 0123456789KEY1: 0123456789
KEY1: 0123456789
FREQ will scroll through characters to adjust the flashing one on screen, with BACK and NEXT stepping along the key.
The ‘Key’ can be any hex number you like (i.e. characters 0-9 and then letters A-F), but it must match the ‘Key’ on the PC
end. With 128 bit encryption, the ‘Key’ is correspondingly bigger.
And that’s the end of the set-up wizard. Pressing ENTER after the KEY1 parameter will display
Wiser Data Changed
Wiser Data ChangedWiser Data Changed
Wiser Data Changed
[ENTER] to Confirm
[ENTER] to Confirm[ENTER] to Confirm
[ENTER] to Confirm
and pressing ENTER will then send the new settings to the Wiser and exit the wizard.
Wiser 2400 Setup
Wiser 2400 SetupWiser 2400 Setup
Wiser 2400 Setup
Updating Wiser Data
Updating Wiser DataUpdating Wiser Data
Updating Wiser Data
followed by
Wiser 2400 Setup
Wiser 2400 SetupWiser 2400 Setup
Wiser 2400 Setup
Wiser
Wiser Wiser
Wiser Data Updated
Data UpdatedData Updated
Data Updated