User´s Manual WR series Antes de utilizar el equipo, lea la sección “Precauciones de seguridad” de este manual. Conserve este manual para futuras consultas. Before operating the device, please read the “Safety precautions” section of this manual. Retain this manual for future reference.
CONTENTS SAFETY PRECAUTIONS 3 WARRANTY 4 DECLARATION OF CONFORMITY 5 SYSTEM DESCRIPTION 6 LINE DRAWINGS 7 7-8 CONNECTION 9 SPECIFICATIONS 10-12 CONFIGURATIONS 4 x WR-8826 (625W @ 8 Ohms) 8 x WR-8826 (1150W @ 4 Ohms) 16 x WR-8826 (2100W @ 2 Ohms) 4 x WR-6412 or WR-6415 (1150W @ 4 Ohms) 8 x WR-6412 or WR-6415 (2100W @ 2 Ohms) 16 x WR-6412 or WR-6415 (3700W @ 2 Ohms) INSTALLATION INSTRUCTIONS 13-16 17 TROUBLESHOOTING Manual del Usuario / WR series / User’s Manual
WR series Precauciones de Seguridad Safety Precautions Cajas acústicas pasivas / Passive loudspeaker enclosures Conserve y lea todas estas instrucciones. Siga todas las advertencias. El signo de exclamación dentro de un triángulo indica la existencia de componentes internos cuyo reemplazo puede afectar a la seguridad. Keep these instructions. Heed all warnings. Follow all instructions.
GARANTÍA Todos nuestros productos están garantizados por un periodo de 24 meses desde la fecha de compra. Las garantías sólo serán válidas si son por un defecto de fabricación y en ningún caso por un uso incorrecto del producto. Las reparaciones en garantía pueden ser realizadas, exclusivamente, por el fabricante o el servicio de asistencia técnica autorizado. Otros cargos como portes y seguros, son a cargo del comprador en todos los casos.
DECLARACIÓN DE CONFORMIDAD DECLARATION OF CONFORMITY D.A.S. Audio, S.A. C/ Islas Baleares, 24 - 46988 - Pol. Fuente del Jarro - Valencia. España (Spain).
SYSTEM DESCRIPTION Introduction The WR (Weather Resistant) series is a series of products aimed at the outdoor installation market. This series is EN 54 certified according to the EN 54-24:2008 standard ( Fire detection and fire alarm systems. Part 24: Components of voice alarm systems. Loudspeakers).
LINE DRAWINGS ALL DIMENSIONS IN MILIMETERS WR-8826 Bottom View 545 267 226 Front View Rear View Right View WR-6412 390 700 390 Bottom View Front View Right View Rear View WR-6415 770 456 462 Bottom View Front View Right View Rear View CONNECTION The WR series includes protection methods to ensure the best connectivity conditions even under harsh weather conditions. It includes a waterproof cover which gives us a double connection chamber.
The system includes 5m of connection wire ready to use in the application. If more than 5m of connection wire is required, a longer cable can be used. If so proceed as follows: 1.- Prepare the rear part of the enclosure for cable connection, removing the existing cable.
TECHNICAL SPECIFICATIONS Technical Specifications R RMS (Average) Power Handling : Program Power HandlingP: Peak Power HandlingK: On-axis Frequency Range (-10dB): Nominal Impedancez: Minimum Impedancez: On-axis Sensitivity, 1w/1m : Rated Peak SPL at full power: Nominal -6dB Beamwidths: Enclosure Material: Color/Finish: Transducers/Replacement Parts: Grille: Connector: Dimensions (H x W x D): Net Weight: Optional Accessories: WR-6412 WR-6415 WR-8826 400 W 800 W 1600 W 60 Hz - 20 kHz 8 Ohms 8,2 Ohms @
CONFIGURATIONS 4 x WR-8826 625W @ 8 Ohms DSP-2040 D-20 Two WR-8826 (16ohms each) in parallel mode per channel. Refer to the user manual of the D-20 amplifier for SPEAKON connection. 8 x WR-8826 1150W @ 4 Ohms DSP-2040 D-20 Four WR-8826 (16ohms each) in parallel mode per channel. Refer to the user manual of the D-20 amplifier for SPEAKON connection.
16 x WR-8826 2100W @ 2 Ohms DSP-2040 D-20 Eight WR-8826 (16ohms each) in parallel per channel. Refer to the user manual of the D-20 amplifier for SPEAKON connection. 4 x WR-6412 (or WR-6415) 1150W @ 4 Ohms WR-6412 WR-6412 DSP-2040 D-20 Two WR-6412 (8 ohms each) in parallel per channel. Refer to the user manual of the D-20 amplifier for SPEAKON connection.
8 x WR-6412 (or WR-6415) 2100W @ 2 Ohms WR- 6415 DSP-2040 D-20 WR- 6415 Four WR-6415 (8 ohms each) in parallel per channel. Refer to the user manual of the D-20 amplifier for SPEAKON connection. WR-6412 16 x WR-6412 (or WR-6415) 3700W @ 2 Ohms WR-6412 DSP-2040 D-100 WR-6412 WR-6412 Four WR-6412 (8 ohms each) in parallel per channel Refer to the user manual of the D-100 amplifier for SPEAKON connection.
INSTALLATION INSTRUCTIONS Warnings This manual contains needed information for flying D.A.S. Audio systems, description of the elements and safety precautions. To perform any operations related to flying the system, read the present document first, and act on the warnings and advice given. The goal is to the allow the user to become familiar with the mechanical elements required to fly the acoustic system, as well as the safety measures to be taken during set-up and teardown.
Flying with eyebolts The WR series models feature internal steel flying points with mounting threads. These eyebolt flying points are factory sealed with M10 screws, which are replaced with eyebolts on the flying points as required. Flying with eyebolts is very economical and safe, and is specially recommended for fixed installations where the boxes are permanently fixed. The Allen-head screws must be removed and replaced by M10 eyebolts on one side of the enclosure.
Rigging accessories AXU-WR8826 / AXU-WR6412 / AXU-WR6415 The AXU accessories have been designed to enable mounting the speakers in a horizontal and vertical position. They can also be installed on walls or ceilings. Mounting instructions: 1.- Remove the top and bottom screws from the speaker cabinet. 2.- Position the AXU-WRXXXX on the wall or ceiling. The AXU-WR8826 /AXU-WR6412 /AXUWR6415 are not included with the WR-8826 / WR-6412 and WR-6415 respectively in the packaging. 3.
Description of the AXU-WR8826 / AXU-WR6412 / AXU-WR6415 Refer to the user’s manual of accessories, on our website, for more information.
TROUBLESHOOTING PROBLEM CAUSE 1 - No sound from any units. SOLUTION 1.1 – No signal present in the amplifier 1.1.1 – Check that the amplifier is on. 1.1.2 – Check that the gain is set above its minimum setting. 1.1.3 – Check that there is a signal to your amplifier from your mixer. 1.2 – Defective cable. 1.2.1 – Check that the cable from the sound source to the UNIT is connected correctly. Replace the cable if defective. 1.2.2 – Check that none of the connected cables are cut or frayed.
UM_WR_04_EN www.dasaudio.com D.A.S. AUDIO, S.A. C/. Islas Baleares, 24 46988 Fuente del Jarro Valencia, SPAIN Tel. 96 134 0525 Tel. Intl. +34 96 134 0860 Fax 96 134 0607 Fax Intl. +34 96 134 0607 D.A.S. AUDIO OF AMERICA, INC. Sunset Palmetto Park 6816 NW 77th Court. Miami, FL. 33166 - U.S.A. TOLL FREE: 1-888DAS4USA Tel. +1 305 436 0521 Fax +1 305 436 0528 D.A.S. AUDIO ASIA PTE. LTD. 25 Kaki Bukit Crescent #01-00/02-00 Kaki Bukit Techpark 1 Singapore 416256 Tel.