Product Info

Page 6/26
2.2. Protection offered by the WORK AIR DL001 T U protective device
In view of the particular protection offered by the WORK AIR DL001 T U protective device,
it must be considered Personal Protective Equipment (PPE) and is therefore subject to the
requirements established by Regulation (EU) 2016/425. The WORK AIR DL001 T U
protective device covered by this Informative Note must be considered Class 2 PPE
according to Regulation (EU) 2016/425, namely PPE to which DAirlab may affix the CE mark
only once the product has passed the “EU type examination” at a notified body.
The Notified Body that certified your WORK AIR DL001 T U is:
EU NOTIFIED BODY No. 2008 DOLOMITICERT Scarl, Zona industriale Villanova 7/A –
32013 LONGARONE (BL) better specified in the CERTIFICATIONS chapter of this
Informative Note.
Conformity with the essential health and safety requirements established by Regulation (EU)
2016/425 has also been achieved on account of compliance of the WORK AIR DL001 T U
Personal Protective Equipment with the following technical specifications:
• DOLOMITICERT – Technical specifications for inflatable protectors with electronic
activation for workers working at height – Revision n° 0 of 07 July 2020.
These technical specifications are based, among others, also on the following document:
- EN 1621-4:2013 Motorcyclists' protective clothing against mechanical impact – Part
4: Motorcyclists' inflatable protectors – Requirements and test methods.
The WORK AIR DL001 T U is equipped with an electronic control unit called 002_W, which
complies with the requirements and essential provisions of the following European Directive:
• Directive 2014/30/EU of the European Parliament and of the Council of 26 February
2014 on the harmonization of the laws of the Member States relating to
electromagnetic compatibility.
Frequency bands and respective transmitted power limits applicable to the device
(standardized frequencies and powers).