Operation Manual

ENGLISH
17
Other functions
TV, SCART1, SCART2 and S-VIDEO modes
(You can’t set PC mode in this menu. Use the TV/AV
button)
External equipment inputs:S-VIDEO mode are used for
video devices like VCRs, DVDs, etc.), SCARTmode is used
for SCART type devices.
Note : If a VCR is connected to the antenna jack, use TV
mode. See External Equipment Connection section.
1. Press the MENU button.
2. Select the Special menu.
3. Press the PR
xxyy
button to select Input.
4. Press the VOL
ÏÏqq
button to select TV, SCART1,
SCART2 and S-VIDEO.
SCART1 : AV device connected to the SCART1 jack.
SCART2 : AV device connected to the TV's SCART2 jack.
S-VIDEO : S-VIDEO device connected to the TV's S-
VIDEO Input.
To return to TV mode, press the TV/AV button.
Alternatively you can select the TV, SCART1, SCART2, S-
VIDEO, PC-ANALOG or PC-DIGITAL mode by pressing
the TV/AV button.
Auto sleep
If you select Auto sleep on the set will automatically
switch itself to standby mode approximately ten minutes
after a TV Channel stops broadcasting.
1. Press the MENU button, select the Special menu.
2. Press the PR
xxyy
button to select Auto sleep.
3. Press the VOL
ÏÏqq
button to select On.
4. Press the TV/AV button to return to normal TV
viewing.
Blue back
Programme without a program signal appear in blue.
Auto wide (Aspect Ratio Control)
Press the ARC button to select a desired picture format.
Each press of the ARC button, selects Auto Wide, 16:9,
14:9, ZOOM, 1:1 and Auto wide mode.
▲▼ ◀▶ MENUTV/AV
Special
Input TV
Auto sleep Off
Blue back On
Auto wide Off
Downloaded from www.Manualslib.com manuals search engine