Operation Manual

22
External Equipment Connection
You can connect additional equipment, such as VCRs, camcorders etc. to your set.
Examples are shown below.
Antenna connection
1. Connect RF out on the VCR to
the Antenna input on the rear of
the TV.
2. Connect the antenna cable to
the antenna in jack on the VCR.
3. Use the TV/AV button to select
TV mode.
4. Press the PLAY button on the
VCR.
SCART 2
1. Connect the AV out jacks on
the AV device to the SCART on
the TV.
2. Use the TV/AV button to select
SCART2 mode.
3. Press the PLAY button on the
DVD.
SCART 1
1. Connect the A/V out jacks on the
AV device to SCART jack on the TV.
2. Use the TV/AV button to select
SCART1 mode.
3. Press the PLAY button on the VCR.
The VCR playback picture appears on
the TV screen.
VCR
SCART1SCART2
ANT.
DVD
SCART1SCART2
ANT.
DVD
SCART1SCART2
ANT.
Downloaded from www.Manualslib.com manuals search engine