User Manual Part 1

Using the Configuration Utility

for Windows 2000, 98, or ME

If you are using Windows 2000, 98, ME, or NT, the Configuration Utility program for the WUS-B12 is called

WLAN Monitor. Once you have installed WLAN Monitor (the configuration utility), you can read this section of

the manual to find out how to monitor and configure your WUS-B12 adapter using WLAN Monitor. Screenshots

for this section have been taken in Windows 2000. There are four tabs in the WLAN Monitor Configuration Utility

program. In this section we will describe the uses for each tab in the Configuration Utility window.

To access WLAN Monitor once it has been installed, just right-click on the WLAN Monitor icon in the taskbar,

and then click on Wireless Network.

Under the Configuration Tab you will find a list of access points to which you may add or change connections.

Configuration Tab

Using the Configuration Utility

for Windows 2000, 98, or ME

(continued)

On the left side of the screen are Available WLANs which you may connect to by first selecting the WLAN (it will

appear highlighted) and then clicking on Add. When you do so a screen like the one below will pop up: