User's Manual

16
Using the Configuration Menu (continued)
Advanced Setting> Access Point>Configuration>WLAN partition
WLAN Partition is used to allow/disallow traffic among users or transmission media.
Wireless Band: For 11g only AP, there is only IEEE802.11g selection for the field.
Internal Station Connection: When “Enabled”, every WLAN station connected to the
Access Point can see each other through PING, FTP, TELNET or Network Neighborhood
Search. Otherwise, any station probing will be cut off. The default setting is “
Enabled
”.
Ethernet to WLAN Access:
When “
Enabled
”, Ethernet broadcast packets are allowed
to penetrate the Access Point to the WLAN client(s). By disabling the option, no one from
the Ethernet side can initiate any probing action on the WLAN client(s). The broadcast
packets from the WLAN client(s) into the Ethernet LAN side will not be affected by this
option setting.
Please click on the “Apply” button to save the options once you have completed the
changes.