User Manual

14
Status: Displays
the MAC Address of
the Access Point
that is associated
with the DWL-
AG520.
SSID: The Service
Set Identifier is the
name assigned to
the wireless
network. The factory
SSID setting is set
to default.
Frequency: The
DWL-AG520 is a tri-mode, dualband wireless PCI adapter. In this instance
802.11b indicates that the DWL-AG520 is communicating in the 2.4GHz band.
Wireless Mode: Either Infrastructure or Ad-Hoc will be displayed here.
Encryption: You can see if WEP is enabled or disabled here
TxRate: The default setting is Auto; TxRate settings are automatically
determined by the DWL-AG520 depending on the distance from the access
point at this default setting.
Channel: Displays the channel information. By default, the channel is set to
Auto and selection is automatically determined by the DWL-AG520.
Signal Strength: The Signal Strength represents the wireless signal between
the access point and the DWL-AG520. The percentage coincides with the
graphical bar.
Packet Count: Displays the statistics of data packets transmitted and
received.
Configuration Utility
Link Info
default