User's Manual

8D-Link WDA-2320 User Manual

Section 2 - Installation

Getting Started

Installation

This section will walk you through the installation process. If you have a built-in wireless adapter, please disable it in device manager

before installing your D-Link adapter. Also, if you have previously installed another wireless adapter, please make sure any software

is uninstalled.

Before installing your new D-Link wireless adapter, please verify the following:

• Remove any previous installations of wireless adapters

• Disable any built-in wireless adapters

• Verify the settings such as the SSID and security settings of the network(s) you want to connect to

Remove Existing Installations

If you’ve installed a different manufacture’s adapter or a different model D-Link adapter, make sure the software is uninstalled before

installing the new software. Some utilities may cause a conﬂict with the new software. If you plan to use multiple adapters at different

times, make sure the utilities are not set to load when your computer boots up. Windows

XP users may use the built-in wireless

utility for all adapters.

To remove any old software:

Windows

XP/Vista™ users: Click Start > Control Panel > Add or Remove Programs.

Windows

2000 users: Click Start > Settings > Control Panel > Add or Remove Programs.