DSL-502T ADSL Router User ‘s Guide (December 2004) 651SL502T045
DSL-502T ADSL Router User’s Guide FCC Warning This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
Table Of Contents About This User’s Guide...................................................................................... v BEFORE YOU START .......................................................................V Installation Overview ......................................................................................... v The Setup Wizard .............................................................................................. v PACKING LIST.................................................
NAT ............................................................................................................... 38 ATM............................................................................................................... 39 Static Routing ................................................................................................. 40 Dynamic Routing (RIP) ..................................................................................... 41 Remote Access...................................
DSL-502T ADSL Router User’s Guide About This User’s Guide This user’s guide provides instructions on how to install the DSL-502T ADSL Router and use it to provide Internet access for a computer or an Ethernet LAN. If you are using a computer with a functioning Ethernet port, the quickest and easiest way to set up the DSL-502T is to follow the instructions provided in the Quick Installation Guide.
DSL-502T ADSL Router User’s Guide Installation Requirements In order to establish a connection to the Internet it will be necessary to provide information to the Router that will be stored in its memory. For some users, only their account information (Username and Password) is required. For others, various parameters that control and define the Internet connection will be required. You can print out the two pages below and use the tables to list this information.
DSL-502T ADSL Router User’s Guide Information you will need from your ADSL service provider: Username This is the Username used to log on to your ADSL service provider’s network. It is commonly in the form − user@isp.com. Your ADSL service provider uses this to identify your account. Password This is the Password used, in conjunction with the Username above, to log on to your ADSL service provider’s network. This is used to verify the identity of your account.
DSL-502T ADSL Router User’s Guide Information you will need about your DSL-502T ADSL Router: Username This is the Username needed access the Router’s management interface. When you attempt to connect to the device through a web browser you will be prompted to enter this Username. The default Username for the Router is admin. The user cannot change this. Password This is the Password you will be prompted to enter when you access the Router’s management interface. The default Password is admin.
DSL-502T ADSL Router User’s Guide Installing the USB Driver IMPORTANT: Do not connect the USB cable to your PC before completing the below steps. The CD-ROM shipped with the Router contains the USB driver software. Insert DSL-502T CD-ROM into the CD-ROM drive. Within a few seconds you should see the dialog box shown below. If you do not see the auto-run dialog box shown below, explore the CD-ROM and double-click the setup application file autorun.exe or find the file Setup.
DSL-502T ADSL Router User’s Guide 3. Click Install to begin the installation. 4. Click Finish to complete the InstallShield wizard. When the USB driver has been installed, insert one end of the USB cable included with the router into the DSL-502T router’s USB port. Insert the other end of the USB cable into a USB port on your PC. Connect the power adapter to the power input at the back panel of the DSL-502T and then plug the other end of the power adapter to a wall outlet or power strip.
DSL-502T ADSL Router User’s Guide 1 Introduction This section provides a brief description of the Router, its associated technologies and a list of Router features. Router Description and Operation The DSL-502T Router is designed to provide a simple and cost-effective ADSL Internet connection for a private Ethernet network. The Router combines high-speed ADSL Internet connection, IP routing management for the LAN in one package. The Router is easy to install and use.
DSL-502T ADSL Router User’s Guide Router Features The DSL-502T ADSL Router utilizes the latest ADSL enhancements to provide a reliable Internet portal suitable for most small to medium sized offices. DSL-502T advantages include: • PPP (Point-to-Point Protocol) Security – The DSL-502T ADSL Router supports PAP (Password Authentication Protocol) and CHAP (Challenge Handshake Authentication Protocol) for PPP connections.
DSL-502T ADSL Router User’s Guide Standards Compatibility and Compliance The DSL-502T complies with or is compatible with the following standards as recognized by their respective agencies. • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • ITU G.992.2 (G.lite) compliant ITU-T Rec. I.
DSL-502T ADSL Router User’s Guide Front Panel Display Place the Router in a location that permits an easy view of the LED indicators on the front panel. The LED indicators on the front panel include the Power, Status, ADSL Link/Act, Ethernet Link/Act, and USB Link/Act indicators. The ADSL, Ethernet, and USB indicators monitor link status and activity (Link/Act). Power Steady green light indicates the unit is powered on. When the device is powered off this remains dark.
DSL-502T ADSL Router User’s Guide Rear Panel All cable connections to the Router are made at the rear panel. The factory-reset button is located here as well. USB port, connect USB cable here and install USB driver Power button Ethernet port, connect Ethernet cable here ADSL port, connect ADSL cable here Power Adapter connects here Rear Panel Cable and Power Connections Factory Reset button Note To manually reboot the Router, toggle the power switch off and on.
DSL-502T ADSL Router User’s Guide 2 Hardware Installation The DSL-502T maintains three separate interfaces, an Ethernet, a USB and an ADSL interface. Place the Router in a location where it can be connected to the various devices as well as to a power source. The Router should not be located where it will be exposed to moisture or excessive heat. Make sure the cables and power cord are placed safely out of the way so they do not create a tripping hazard.
DSL-502T ADSL Router User’s Guide represents the WAN interface, the connection to the Internet. It is the physical link to the service provider’s network backbone and ultimately to the Internet. Connect Router to Ethernet The Router may be connected to a single computer or Ethernet device through the 10/100 BASETX Ethernet port on the rear panel. Any connection to an Ethernet concentrating device such as a switch or hub must operate at a speed of 10/100 Mbps only.
DSL-502T ADSL Router User’s Guide 3 Basic Router Configuration The first time you setup the Router it is recommended that you configure the WAN connection using a single computer making sure that both the computer and the Router are not connected to the LAN. Once the WAN connection is functioning properly, you may continue to make changes to Router configuration including IP settings and DHCP setup. This chapter is concerned with using your computer to configure the WAN connection.
DSL-502T ADSL Router User’s Guide Configure Windows XP for DHCP Use the following steps to configure a computer running Windows XP to be a DHCP client. 1. From the Start menu on your desktop, go to Settings, then click on Network Connections.
DSL-502T ADSL Router User’s Guide In the Network Connections window, right-click on LAN (Local Area Connection), then click Properties. 2. In the General tab of the Local Area Connection Properties menu, highlight Internet Protocol (TCP/IP) under “This connection uses the following items:” by clicking on it once. Click on the Properties button.
DSL-502T ADSL Router User’s Guide 3. Select “Obtain an IP address automatically” by clicking once in the circle. Click the OK button. Your computer is now ready to use the Router’s DHCP server. Windows 2000 First, check for the IP protocol and, if necessary, install it: 1. In the Windows task bar, click the Start button, point to Settings, and then click Control Panel. 2. Double-click the Network and Dial-up Connections icon. 3.
DSL-502T ADSL Router User’s Guide Your computer is now ready to use the Router’s DHCP server. Windows ME First, check for the IP protocol and, if necessary, install it: 1. In the Windows task bar, click the Start button, point to Settings, and then click Control Panel. 2. Double-click the Network and Dial-up Connections icon. 3. In the Network and Dial-up Connections window, right-click the Network icon, and then select Properties. 4.
DSL-502T ADSL Router User’s Guide Configure Windows 95 and Windows 98 for DHCP 1. Open the Control Panel window, and then click the Network icon. 2. Select the network component labeled TCP/IP, and then click Properties. 3. If you have multiple TCP/IP listings, select the listing associated with your network card or adapter. 4. In the TCP/IP Properties dialog box, click the IP Address tab. 5. Click the Obtain an IP address automatically option. 6.
DSL-502T ADSL Router User’s Guide Access the Configuration Manager Now that your computer’s IP settings allow it to communicate with the Router, you can access the configuration software. Be sure that the web browser on your computer is not configured to use a proxy server in the Internet settings. In Windows Internet Explorer, you can check if a proxy server is enabled using the following procedure: 1. In Windows, click on the Start button, go to Settings and choose Control Panel. 2.
DSL-502T ADSL Router User’s Guide Configure the Router When you successfully connect to the web manager, the Home directory tab will display the Setup Wizard menu. You can launch the Setup Wizard from this page or use the menu buttons located in the left panel of the web page to view other menus used for basic configuration. You may use the Setup Wizard if your Internet connection is a PPPoE connection. If you are using a PPPoE and connection and want to use the Setup Wizard, follow the instructions below.
DSL-502T ADSL Router User’s Guide Tools Click the Tools tab to access the Administrator Settings (used to set the system user name and password, backup and load settings), System Time Configuration, Firmware Upgrade, Diagnostic Test and Save & Reboot menus. Status Click the Status tab to view the Device Information, DHCP Clients, Event Log, Traffic Statistics and ADSL Status information windows.
DSL-502T ADSL Router User’s Guide The default User Name admin used for Router management cannot be changed. Note Set the system time of the Router. Choose the time zone you are in from the pull-down menu and click Next. If you wish to return to the previous menu during the setup process, click the Back button. Now select the Connection Type for the Internet and enter your account User Name and Password. Your ISP has given this information to you.
DSL-502T ADSL Router User’s Guide menu are PPPoE LLC, PPPoA LLC and PPPoA VC-MUX. For Bridge Mode and Static IP connections, use the WAN menu in the Home directory to configure the connection (see below for instruction on setting up Bridge and Static IP connections). 1. Select the Connection Type specific to your service. The choices available in the Setup Wizard are PPPoE LLC, PPPoA LLC and PPPoA VC-MUX 2. Type in the Username and Password used to identify and verify your account to the ISP. 3.
DSL-502T ADSL Router User’s Guide Finally you can confirm that the setup process is completed. If you are satisfied that you have entered all the necessary information correctly, click the Restart button to save the new configuration settings and restart the Router. If you need to change settings from a previous menu, click the Back button. Do not turn the Router off while it is restarting. When it is finished rebooting, click Close to close the box and continue to configure the Router as desired.
DSL-502T ADSL Router User’s Guide Configure WAN Connection To configure the Router’s basic configuration settings without running the Setup Wizard, you can access the menus used to configure WAN, LAN, DHCP and DNS settings directly from the Home directory. To access the WAN Settings menu, click on the WAN link button on the left side of the first window that appears when you successfully access the web manager.
DSL-502T ADSL Router User’s Guide PPPoE and PPPoA Connection for WAN Follow the instructions below to configure the Router to use a PPPoE or PPPoA for the Internet connection. Make sure you have all the necessary information before you configure the WAN connection. 1. Click to select the PPPoE/PPPoA radio button in the WAN Settings options list. This is selected by default if you are configuring the Router for the first time.
DSL-502T ADSL Router User’s Guide Bridged Connection for WAN For Bridged connections it will be necessary for most users to install additional software on any computer that will the Router for Internet access. The additional software is used for the purpose of identifying and verifying your account, and then granting Internet access to the computer requesting the connection. The connection software requires the user to enter the User Name and Password for the ISP account.
DSL-502T ADSL Router User’s Guide Static IP Address for WAN When the Router is configured to use Static IP Address assignment for the WAN connection, you must manually assign a global IP Address, Subnet Mask and Gateway IP Address used for the WAN connection. Most users will also to configure DNS server IP settings in the DNS Settings configuration menu (see below). Follow the instruction below to configure the Router to use Static IP Address assignment for the WAN connection. WAN Settings - Static IP 1.
DSL-502T ADSL Router User’s Guide Multiple Private Virtual Connections The Router supports multiple virtual connections. Up to eight PVCs to eight separate destinations can be created and operated simultaneously utilizing the same bandwidth. Additional PVC connections can be added for various purposes. For example, you may want to establish a private connection to remote office in order to create an extended LAN, or setup a server on a separate connection.
DSL-502T ADSL Router User’s Guide In the example below, a new VC (Pvc1) has been added using the WAN Settings menu. The connection is setup as a bridged connection. Configure new VC The new VC appears can be configured separately in other menus such as Static Routing.
DSL-502T ADSL Router User’s Guide LAN IP Settings You can configure the LAN IP address to suit your preference. Many users will find it convenient to use the default settings together with DHCP service to manage the IP settings for their private network. The IP address of the Router is the base address used for DHCP. In order to use the Router for DHCP on your LAN, the IP address pool used for DHCP must be compatible with the IP address of the Router.
DSL-502T ADSL Router User’s Guide DHCP Server Settings for the LAN The DHCP server is enabled by default for the Router’s Ethernet LAN interface. DHCP service will supply IP settings to workstations configured to automatically obtain IP settings that are connected to the Router though the Ethernet port. When the Router is used for DHCP it becomes the default gateway for DHCP client connected to it.
DSL-502T ADSL Router User’s Guide DHCP Relay To use DHCP service from your ISP, select the DHCP Relay option and type the DHCP Relay IP address in the space provided. Click Apply to begin DHCP relay from the ISP. Note To use DHCP Relay from the ISP, DHCP Service Filtering must be disabled. See the Firewall section in the next chapter. DNS Server Settings The Router can be configured to relay DNS from your ISP or another available service to workstations on your LAN.
DSL-502T ADSL Router User’s Guide Save Settings and Reboot When you have configured the DSL-502T with the settings you desire, make sure you save those settings. To save the system configuration settings, click the Tools tab. You will be presented first with the Administrator Settings menu. This menu is described in the next chapter. To save the current configuration, click the Save & Reboot button to view the menu pictured here.
DSL-502T ADSL Router User’s Guide 4 Advanced Router Management This chapter introduces and describes the management features that have not been presented in the previous chapter. These include the more advanced features used for network management and security as well as administrative tools to manage the Router, view statistics and other information used to examine performance and for troubleshooting.
DSL-502T ADSL Router User’s Guide UPnP UPnP supports zero-configuration networking and automatic discovery for many types of networked devices. When enabled, it allows other devices that support UPnP to dynamically join a network, obtain an IP address, convey its capabilities, and learn about the presence and capabilities of other devices. DHCP and DNS service can also be used if available on the network.
DSL-502T ADSL Router User’s Guide Port Forwarding Use the Port Forwarding menu to create Virtual Server functions through the Router. A Virtual Server can allow remote users to access services on your LAN such as FTP for file transfers or SMTP and POP3 for e-mail. The DSL-502T will accept remote requests for these services at your Global IP Address, using the specified TCP or UDP protocol and port number, and then redirect these requests to the server on your LAN with the Private IP address you specify.
DSL-502T ADSL Router User’s Guide To configure a virtual server set, define the following settings in the Virtual Server configuration menu located in the top half of the browser window. Parameter Description Rule Name Provide a name for the rule. This name will not appear in the list below, however it may be useful if you later need to edit the settings for the rule. Rule names are optional. Private IP This is the IP address of the server on your LAN that will provide the service to remote users.
DSL-502T ADSL Router User’s Guide DMZ Since some applications are not compatible with NAT, the Router supports use of a DMZ IP address for a single host on the LAN. This IP address is not protected by NAT and will therefore be visible to agents on the Internet with the right type of software. Keep in mind that any client PC in the DMZ will be exposed to various types of security risks.
DSL-502T ADSL Router User’s Guide Filters Filter rules in the Router are put in place to allow or block specified traffic. The Filter Rules however can be used in a single direction to examine and then Allow or Deny traffic for Inbound (WAN to LAN) or Outbound (LAN to WAN) routed data. The rules based on IP address and TCP/UDP port. Configure the filter rules as desired and click the Apply button to create the rule.
DSL-502T ADSL Router User’s Guide The parameters described below are used to set up filter rules. Parameter Description Source IP For an Outbound Filter, this is the IP address or IP addresses on your LAN for which you are creating the filter rule. For an Inbound Filter, this is the IP address or IP addresses for which you are creating the filter rule. You can opt to indicate a Mask Range, a Single IP, an IP Range or Any IP from the pull-down menu.
DSL-502T ADSL Router User’s Guide Firewall The Firewall Configuration menu allows the Router to enforce specific predefined policies intended to protect against certain common types of attacks. There are two general types of protection (DoS, Port Scan) that can be enabled on the Router, as well as filtering for specific packet types sometimes used by hackers. You can choose to Enable or Disable protection against a customized basket of attack and scan types.
DSL-502T ADSL Router User’s Guide A DoS "denial-of-service" attack is characterized by an explicit attempt by attackers to prevent legitimate users of a service from using that service. Examples include: attempts to "flood" a network, thereby preventing legitimate network traffic, attempts to disrupt connections between two machines, thereby preventing access to a service, attempts to prevent a particular individual from accessing a service, or, attempts to disrupt service to a specific system or person.
DSL-502T ADSL Router User’s Guide ATM The ATM Virtual Circuit connection menu is used to configure the WAN connection. If you are using multiple PVCs, you can change the configuration of any PVC in this menu. To create new or additional PVCs, read the section below on Multiple PVCs. This menu can be used as an alternative menu to configure the same settings found on the WAN menu in the Home directory.
DSL-502T ADSL Router User’s Guide Static Routing Use Static Routing to specify a route used for data traffic within your Ethernet LAN or to route data on the WAN. This is used to specify that all packets destined for a particular network or subnet use a predetermined gateway. Static Routing menu To add a static route to a specific destination IP on the local network, enter a Destination IP address, Netmask, then click the Gateway radio button and type in the Gateway’s IP address.
DSL-502T ADSL Router User’s Guide Dynamic Routing (RIP) The Router supports RIP v1 and RIP v2 used to share routing tables with other Layer 3 routing devices on your local network or remote LAN. Dynamic Routing (RIP) menu To enable RIP, select Enabled from the RIP pull-down menu, select the Protocol (RIPv1, RIPv2 and RIPv1 Compatible) and Direction (In, Out, or Both), and click Apply. The RIPv1 Compatible option will respond to or send RIP requests compatible with both RIP v1 and RIP v2.
DSL-502T ADSL Router User’s Guide Remote Access Use the Remote Access menu in the Advanced directory to enable remote management of the Router through the web interface or via Telnet from a specified source IP address. This will enable Router and network managment from outside the local network through the WAN connection. Remote management is disabled by default. Note Check the Service Filtering settings in the Firewall menu if you will use Telnet to manage the Router from a remote station.
DSL-502T ADSL Router User’s Guide Tools and Utilities Click the Tools tab to reveal the menu buttons for various functions located in this directory. The Administrator Settings is the first menu that appears in the Tools directory. It is used to change the system password used to access the web manager, to save or load Router configuration settings and to restore default settings. The functions in this and the other Tools menus are described below.
DSL-502T ADSL Router User’s Guide Save or Load Configuration File Once you have configured the Router to your satisfaction, it is a good idea to back up the configuration file to your computer. To save the current configuration settings to your computer, click the Admin button in the Tools directory to display the Administrator Settings menu. Click the Save button to Save Settings to Local Hard Drive. You will be prompted to select a location on your computer to put the file. The file type is .
DSL-502T ADSL Router User’s Guide Time The Router provides a number of options to maintain current date and time including SNTP. Time Configuration To configure system time on the Router, select the method used to maintain time. The options available include SNTP, using your computer’s system clock (default) or set the time and date manually. If you opt to use SNTP, you must enter the SNTP server URL or IP address. Click the Apply button to set the system time.
DSL-502T ADSL Router User’s Guide Firmware Upgrade Note Performing a Firmware Upgrade can sometimes change the configuration settings. Be sure to back-up the Router’s configuration settings before upgrading the firmware. Use the Firmware Upgrade menu to load the latest firmware for the device. Note that the device configuration settings may return to the factory default settings, so make sure you save the configuration settings with the System Settings menu described above.
DSL-502T ADSL Router User’s Guide Test The Test menus are used to test connectivity of the Router. A Ping test may be done through the local or external interface to test connectivity to known IP addresses. The diagnostics feature executes a series of test of your system software and hardware connections. Use this Test menu when working with your ISP to troubleshoot problems. Ping and Diagnostics Test Menu Ping Test Type the IP address you want to Ping and click on the Ping button.
DSL-502T ADSL Router User’s Guide Save Settings and Reboot When you have configured the DSL-502T with the settings you desire, make sure you save those settings. To save the system configuration settings, click the Tools tab. You will be presented first with the Administrator Settings menu. This menu is described in the next chapter. To save the current configuration, click the Save & Reboot button to view the menu pictured here.
DSL-502T ADSL Router User’s Guide Router Status Information Use the various read-only menus to view system information and monitor performance. Device Information Display Use the Device Information window to quickly view basic current information about the LAN and WAN interfaces.
DSL-502T ADSL Router User’s Guide DHCP Clients View all current DHCP clients connected to the DSL-502T. DHCP Clients list Log The system log displays chronological event log data. Use the navigation buttons to view or scroll log pages. You may also save a simple text file containing the log to your computer. Click the Save Log button and follow the prompts to save the file. Log display Click Clear to delete the current log information.
DSL-502T ADSL Router User’s Guide Traffic See the Traffic Statistics window to monitor traffic on the Ethernet, USB or ADSL Internet connection. Select the interface for which you want to view packet statistics and the information will appear below. Click Refresh to view traffic information. Traffic Statistics information ADSL Use the ADSL Status information and the Test page for troubleshooting the ADSL connection.
DSL-502T ADSL Router User’s Guide A Technical Specifications General Standards: ITU G.992.1 (G.dmt) RFC 1661 (PPP) ITU G.992.2 (G.lite) RFC 1994 (CHAP) ITU G.994.1 (G.Hs) RFC 1334 (PAP) ITU-T Rec. I.361 RFC 2364 (PPP over ATM) ITU-T Rec. I.610 RFC 1631 (NAT) IEEE 802.3 RFC 1877 (Automatic IP assignment) IEEE 802.3u RFC 2516 (PPP over Ethernet) IEEE 802.1d Supports RFC 2131 and RFC 2132 (DHCP) RFC 791 (IP Routing) RFC 826 (ARP) Compatible with all T1.
DSL-502T ADSL Router User’s Guide Physical and Environmental DC Inputs: Input: 100V ~ 240V AC 50 ~ 60Hz Power Adapter: Output: 9V AC, 1A Power Consumption: 3 Watts (max) Operating Temperature: 5° to 40° C (41° - 104° F) Humidity: 5 to 95% (non-condensing) Dimensions: 142 (W) x 117(D) x 31(H) mm Weight: 202 g EMI: FCC Class B, CE Class B Safety: CSA International Reliability: Mean Time Between Failure (MTBF) min.
DSL-502T ADSL Router User’s Guide B IP Address Setup The DSL-502T is designed to provide network administrators maximum flexibility for IP addressing on the Ethernet LAN. The easiest IP setup choice in most cases is to let the Router do it using DHCP, which is enabled by default. This appendix briefly describes various options including DHCP, used for IP setup on a LAN. If you are new to IP networking, the next appendix provides some background information on basic IP concepts.
DSL-502T ADSL Router User’s Guide network), while the last three numbers denote the host IP address (each computer must have a unique address to distinguish it on the network). The IP address scheme used in Example #1 can be used for any LAN that requires up to 253 separate IP addresses (excluding the Router). Notice that the subnet mask is the same for all machines and the default gateway address is the LAN IP address of the Router.
DSL-502T ADSL Router User’s Guide C IP Concepts This appendix describes some basic IP concepts, the TCP/IP addressing scheme and shows how to assign IP Addresses. When setting up the Router, you must make sure it has a valid IP address. Even if you will not use the WAN port (ADSL port), you should, at the very least, make sure the Ethernet LAN port is assigned a valid IP address. This is required for telnet, in-band SNMP management, and related functions such as “trap” handling and TFTP firmware download.
DSL-502T ADSL Router User’s Guide Networks attached to the Internet are assigned class types that determine the maximum number of possible hosts per network. The previous figure illustrates how the net and host portions of the IP address differ among the three classes. Class A is assigned to networks that have more than 65,535 hosts; Class B is for networks that have 256 to 65534 hosts; Class C is for networks with less than 256 hosts.
DSL-502T ADSL Router User’s Guide It is recommended that you choose private network IP Addresses from the above list. For more information on address assignment, refer to RFC 1597, Address Allocation for Private Internets and RFC 1466, Guidelines for Management of IP Address Space. Subnet Mask In the absence of subnetworks, standard TCP/IP addressing may be used by specifying subnet masks as shown below. IP Class Subnet Mask Class A 255.0.0.0 Class B 255.255.0.0 Class C 255.255.255.
DSL-502T ADSL Router User’s Guide D Microfilters and Splitters Most ADSL clients will be required to install a simple device that prevents the ADSL line from interfering with regular telephone services. These devices are commonly referred to as microfilters or sometimes called (inaccurately) line splitters. They are easy to install and use standard telephone connectors and cable.
DSL-502T ADSL Router User’s Guide Line Splitter If you are instructed to use a “line splitter”, you must install the device between the Router and the phone jack. Use standard telephone cable with standard RJ-11 connectors. The splitter has three RJ-11 ports used to connect to the wall jack, the Router and if desired, a telephone or telephone device. The connection ports are typically labeled as follows: Line - This port connects to the wall jack. ADSL – This port connects to the Router.
Offices Australia D-Link Australia 1 Giffnock Avenue, North Ryde, NSW 2113, Sydney, Australia TEL: 61-2-8899-1800 FAX: 61-2-8899-1868 TOLL FREE (Australia): 1800-177100 URL: www.dlink.com.au E-MAIL: support@dlink.com.au Brazil D-Link Brasil Ltda. Edificio Manoel Tabacow Hydal, Rua Tavares Cabral 102 Sala 31, 05423-030 Pinheiros, Sao Paulo, Brasil TEL: (55 11) 3094 2910 to 2920 FAX: (55 11) 3094 2921 E-MAIL: efreitas@dlink.
Germany D-Link Central Europe (D-Link Deutschland GmbH) Schwalbacher Strasse 74, D-65760 Eschborn, Germany TEL: 49-6196-77990 FAX: 49-6196-7799300 URL: www.dlink.de BBS: 49-(0) 6192-971199 (analog) BBS: 49-(0) 6192-971198 (ISDN) INFO: 00800-7250-0000 (toll free) HELP: 00800-7250-4000 (toll free) REPAIR: 00800-7250-8000 E-MAIL: info@dlink.de India D-Link India Plot No.5, Bandra-Kurla Complex Rd., Off Cst Rd.
Sweden D-Link Sweden P. O. Box 15036, S-167 15 Bromma, Sweden TEL: 46-8-564-61900 FAX: 46-8-564-61901 URL: www.dlink.se E-MAIL: info@dlink.se Taiwan D-Link Taiwan 2F, No. 119 Pao-chung Road, Hsin-tien, Taipei, Taiwan TEL: 886-2-2910-2626 FAX: 886-2-2910-1515 URL: www.dlinktw.com.tw E-MAIL: dssqa@tsc.dlinktw.com.tw Turkey D-Link Middle East Deniz Bilgisayar, Buyukdere Cad. Naci Kasim Sk., No. 5 Mecidiyekoy, Istanbul, Turkey TEL: 90-212-213-3400 FAX: 90-212-213-3420 E-MAIL: smorovati@dlink-me.com U.A.E.
