Specifications

17
Save Settings: The
current system set-
tings can be saved as
a file onto the local
hard drive.
Load Settings: The
saved file or any other
saved setting file can
be loaded back on the
access point. To re-
load a system settings
file, click on Browse
to browse the local
hard drive and locate
the system file to be
used. Click Load
when you have selected the file to be loaded back onto the access point.
Reset: To complete the reset, click Reset.
Using the Configuration Utility (continued)
Tools > Admin
New Password:
Enter the new
password.
Confirm
Password:
Re-enter
the password to
confirm it.
Tools > System
Restore: You may also restore the factory settings by clicking on Restore. Make sure
to save the unit’s settings before clicking on Restore.