User's Manual
Table Of Contents
- Product Overview
- Installation
- Configuration
- Access Point Mode
- Wireless Client Mode
- Router Mode
- Setup Wizard
- Internet Setup
- Wireless Setup Wizard
- Wireless Settings
- Network Settings
- USB Settings
- Virtual Server
- Application Rules
- MAC Address Filter
- Website Filters
- Firewall Settings
- Advanced Wireless Settings
- Wi-Fi Protected Setup
- UPnP Settings
- Guest Zone
- DMZ
- IPV6 Settings
- Administrator Settings
- Time Settings
- System Settings
- Firmware Update
- System Check
- Schedules
- Device Information
- Wireless
- Logs
- Statistics
- Internet Sessions
- IPv6
- Help
- Wireless Security
- Connect to a Wireless Network
- Troubleshooting
- Wireless Basics
- Networking Basics
- Technical Specifications
- Warranty
11D-Link DAP-1350 User Manual
Section 1 - Product Overview
Hardware Overview
1 WPA Button/LED
Press to start the WPS process. You will have 120 seconds to start the WPS process on
another wireless device. When enabling WPS, the light will blink during broadcast.
Once connected, the LED will stay solid for 5 seconds and then turn o.
2 USB Port
The USB port is used to connect USB devices such as a printer to share on your
network.
3 Reset Button Press and hold to reset the device back to the factory default settings
Bottom
3
Side
1 2