User's Manual

23D-Link DAP-1350 User Manual
Section 3 - Conguration
Enable Wireless:
Wireless
Network Name:
Wireless Mode:
Enable Auto
Channel Scan:
Wireless
Channel:
Check the box to enable the wireless function. If you
do not want to use wireless, uncheck the box to disable
all the wireless functions. You may also set up a specic
time range (schedule). Select a schedule from the drop
down menu or click Add New Schedule to create a
new schedule.
When you are browsing for available wireless networks,
this is the name that will appear in the list (unless
Visibility Status is set to Invisible, see below). This name
is also referred to as the SSID. For security purposes,
it is highly recommended to change from the default
network name.
Select one of the following:
802.11n Only - Select if you are only using 802.11n
wireless clients.
Mixed 802.11n and 802.11g - Select if you are using
a mix of 802.11n and 11g wireless clients.
Mixed 802.11n, 802.11g and 802.11b - Select if
you are using a mix of 802.11n, 11g, and 11b wireless
clients.
The Auto Channel Scan setting can be selected to
allow the DAP-1350 to select the channel with the least
amount of interference (during boot-up).
Indicates the channel setting for the DAP-1350. The
Channel can be changed to t the channel setting
for an existing wireless network or to customize the
wireless network. If you enable Auto Channel Scan,
this option will be grayed out.
Wireless Setup