User's Manual

25D-Link DAP-1350 User Manual
Section 3 - Conguration
LAN Setup
This section will allow you to change the local network settings of the access point and to congure the DHCP settings.
Device Name:
My LAN
Connection Is:
IP Address:
Subnet Mask:
Default Gateway:
Enter the Device Name of the AP. It is recommended
to change the Device Name if there is more than one
D-Link device within the subnet.
Use the drop-down menu to select Dynamic IP (DHCP)
to automatically obtain an IP address on the LAN/
private network.
Select Static IP to manually enter the IP settings of
your access point.
(For Static IP only) - Enter the IP address of the access
point. The default IP address is 192.168.0.50. If you
change the IP address, once you click Apply, you will
need to enter the new IP address in your browser to
get back into the conguration utility.
(For Static IP only) - Enter the Subnet Mask.
(For Static IP only) - Enter the Gateway. This is usually
the LAN or internal IP address of your router.