User's Manual

28D-Link DAP-1350 User Manual
Section 3 - Conguration
MAC Address Filter
When Disable is selected, MAC addresses are not
used to control network access.
When Turn MAC Filtering ON and ALLOW
computers listed... is selected, only computers
with MAC addresses listed in the MAC Address List
are granted network access.
When Turn MAC Filtering ON and DISALLOW
computers listed... is selected, any computer
with a MAC address listed in the MAC Address List
is refused access to the network.
Enter the MAC address you would like to lter.
You can select a client currently connected to
your access point from the Wireless Client List
drop-down menu and then click << to populate
the MAC Address eld.
Click Save Settings to activate and save.
Click to remove the client from the MAC address
lter rule.
MAC Address
Filter:
MAC Address:
Clear:
Use MAC (Media Access Control) Filters to authorize wireless clients by their MAC addresses to access your network. When
enabled, any client not on the MAC lter list will not be able to access your network.