User's Manual
Table Of Contents
- Product Overview
- Installation
- Configuration
- Access Point Mode
- Wireless Client Mode
- Router Mode
- Setup Wizard
- Internet Setup
- Wireless Setup Wizard
- Wireless Settings
- Network Settings
- USB Settings
- Virtual Server
- Application Rules
- MAC Address Filter
- Website Filters
- Firewall Settings
- Advanced Wireless Settings
- Wi-Fi Protected Setup
- UPnP Settings
- Guest Zone
- DMZ
- IPV6 Settings
- Administrator Settings
- Time Settings
- System Settings
- Firmware Update
- System Check
- Schedules
- Device Information
- Wireless
- Logs
- Statistics
- Internet Sessions
- IPv6
- Help
- Wireless Security
- Connect to a Wireless Network
- Troubleshooting
- Wireless Basics
- Networking Basics
- Technical Specifications
- Warranty
30D-Link DAP-1350 User Manual
Section 3 - Conguration
Wi-Fi Protected Setup
Enable:
Current PIN:
Reset to
Uncongured:
Reset Pin to Default:
Add Wireless Device
with WPS:
Enable the Wi-Fi Protected Setup feature.
Shows the current value of the access point’s PIN.
Resets Wi-Fi Protected Status to Not Congured.
Vista WPS icon will only be displayed when the
Wi-Fi Protected Status is Not Congured.
Restores the default Pin of the access point.
Refer to the next page for the WPS wizard.