User's Manual

51D-Link DAP-1350 User Manual
Section 3 - Conguration
Manual Wireless Setup
Wireless Type:
Site Survey:
Wireless Network
Name:
Wireless Mode:
Wireless Channel:
Channel Width:
Wireless MAC Clone:
Wireless Security
Mode:
WPS:
Select Infrastructure if connecting to an access point or
wireless router, or select Ad-Hoc if connecting to another
wireless client.
Click Site Survey to display a list of wireless networks in your
area. You may select the wireless access point to connect to.
Enter the SSID of the wireless network you want to connect
to. If you do not know for sure, click Site Survey and select it
from the list, if available.
Select the appropriate 802.11 mode based on the wireless
clients in your network. Select Mixed 802.11b/g, 802.11n
Only, or Mixed 802.11b/g/n from the drop-down menu.
The channel will automatically change to the channel of the
AP you are connected to.
Select the Channel Width:
Auto 20/40 - Select if you are using both 802.11n and
non-802.11n wireless devices.
20MHz - Select if you are not using any 802.11n wireless clients.
You can clone the MAC address of the device connected via
Ethernet to the DAP-1350.
Select a wireless security setting. Options are None, WEP, WPA, or WPA2. See the Wireless Security section in this manual for a
detailed explanation of the wireless security options.
Select Enable if you want to congure the DAP-1350 with Wi-Fi Protection setup.