User's Manual

77D-Link DAP-1350 User Manual
Section 3 - Conguration
Wireless Settings
Enable Wireless:
Wireless Network
Name:
Wireless Mode:
Enable Auto
Channel Scan:
Wireless Channel:
Channel Width:
Visibility Status:
Wireless Security
Mode:
Select this to turn the Wi-Fi module on and o.
Use the drop-down box to select if you want to
use a schedule. Click Add New Schedule to add
or change a schedule.
Enter a wireless network name (SSID) for your
network (up to 32 characters).
Select one of the following:
802.11n Only - Select if you are only using 802.11n
wireless clients.
Mixed 802.11n and 802.11g - Select if you are
using a mix of 802.11n and 11g wireless clients.
Mixed 802.11n, 802.11g and 802.11b - Select
if you are using a mix of 802.11n, 11g, and 11b
wireless clients.
Check this box to have the device automatically
scan for the best available channel.
Select a wireless channel. It is recommended to use channels 1,6, or 11.
Select the appropriate channel width between 20MHz or Auto 20/40MHz from the drop-down menu.
Select Invisible if you do not want the SSID of your wireless network to be broadcast by the DAP-1350. If Invisible is selected, the
SSID of the DAP-1350 will not be seen by Site Survey utilities so your wireless clients will have to know the SSID of your DAP-1350
in order to connect to it.
Select a wireless security setting. Options are None, WEP, WPA, or WPA2. Refer to the Wireless Security section of this manual for a
detailed explanation of the wireless security options.