User's Manual

83D-Link DAP-1350 User Manual
Section 3 - Conguration
This will allow you to open ports (port forwarding).
Enter a name for the rule or select an application from
the drop-down menu. Select an application and click
<< to populate the elds.
Enter the IP address of the computer on your local
network that you want to allow the incoming service
to. If your computer is receiving an IP address
automatically from the router (DHCP), you computer
will be listed in the “Computer Name” drop-down
menu. Select your computer and click <<.
Enter the port that you want to open next to Private
Port and Public Port. The private and public ports
are usually the same. The public port is the port seen
from the Internet side, and the private port is the
port being used by the application on the computer
within your local network.
Select TCP, UDP, Both, or Other from the drop-down
menu.
Name:
IP Address:
Private Port/
Public Port:
Protocol Type: