User's Manual

84D-Link DAP-1350 User Manual
Section 3 - Conguration
Application Rules
Enter a name for the rule. You may se lec t a
pre-dened application from the drop-down menu and
click <<.
This is the port used to trigger the application. It can be
either a single port or a range of ports.
Select the protocol of the trigger port (TCP, UDP, or Both).
This is the port number on the Internet side that will be
used to access the application. You may dene a single port
or a range of ports. You can use a comma to add multiple
ports or port ranges.
Select the protocol of the rewall port (TCP, UDP, or Both).
Name:
Trigger:
Trac Type:
Firewall:
Trac Type:
Some applications require multiple connections, such as Internet gaming, video conferencing, Internet telephony and others.
These applications have diculties working through NAT (Network Address Translation). Special Applications makes some
of these applications work with the DAP-1350. If you need to run applications that require multiple connections, specify the
port normally associated with an application in the “Trigger Port” eld, select the protocol type as TCP or UDP, then enter the
rewall (public) ports associated with the trigger port to open them for inbound trac.
The DAP-1350 provides some predened applications in the table on the bottom of the web page. Select the application you
want to use and enable it.