Table of Contents Table of Contents Product Overview ........................................................ 4 Package Contents ................................................... 4 System Requirements ............................................. 4 Introduction .............................................................. 5 Features .................................................................. 7 Wireless Basics ...........................................................
Table of Contents View Log ...................................................... 51 Log Settings ................................................. 52 Maintenance ......................................................... 53 Administrator Settings...................................... 53 Limit Administrator ....................................... 54 System Name Settings................................. 55 Login Settings .............................................. 56 Console Settings .....................
Section 1 - Product Overview Product PackageOverview Contents Ŗ & .KPM 9KTGNGUU 0 #EEGUU 2QKPV Ŗ 2QYGT #FCRVGT Ŗ %#6 'VJGTPGV %CDNG Ŗ %& 41/ YKVJ 7UGT /CPWCN Ŗ 3WKEM +PUVCNN )WKFG Ŗ &GVCEJCDNG #PVGPPCU Note: 7UKPI C RQYGT UWRRN[ YKVJ C FKHHGTGPV XQNVCIG TCVKPI VJCP VJG QPG KPENWFGF with the DAP-1353 will cause damage and void the warranty for this product. System Requirements Ŗ %QORWVGTU YKVJ 9KPFQYU®, Macintosh® QT .
Section 1 - Product Overview Introduction 6JG P )*< #2 KPETGCUGU RTQFWEVKXKV[ D[ CNNQYKPI [QW VQ YQTM HCUVGT CPF OQTG GHſEKGPVN[ 9KVJ VJG DCPFYKFVJ KPVGPUKXG CRRNKECVKQPU NKMG ITCRJKEU QT OWNVKOGFKC YKNN DGPGſV UKIPKſECPVN[ DGECWUG NCTIG ſNGU CTG PQY CDNG VQ OQXG CETQUU VJG PGVYQTM SWKEMN[ 6JG KU ECRCDNG QH QRGTCVKPI KP QPG QH HQWT FKHHGTGPV YKTGNGUU PGVYQTMKPI OQFGU CEEGUU RQKPV 9&5 9KTGNGUU &KUVTKDWVKQP 5[UVGO YKVJ #2 9&5 QT 9KTGNGUU %NKGPV OQFG #P KFGCN U
Section 1 - Product Overview '#2 'ZVGPUKDNG #WVJGPVKECVKQP 2TQVQEQN KU CXCKNCDNG VJTQWIJ VJG 9KPFQYU® XP operating system. You will need to use the same type of EAP protocol on all devices in your network when using the 802.1x feature.
Section 1 - Product Overview Features Ŗ Four different operation modes - %CRCDNG QH QRGTCVKPI KP QPG QH HQWT FKHHGTGPV QRGTCVKQP OQFGU VQ OGGV [QWT YKTGNGUU PGVYQTMKPI PGGFU #EEGUU 2QKPV 9&5 YKVJ #2 9&5 QT 9KTGNGUU %NKGPV Ŗ (CUVGT YKTGNGUU PGVYQTMKPI YKVJ VJG P FTCHV UVCPFCTF VQ RTQXKFG C OCZKOWO YKTGNGUU UKIPCN TCVG QH WR VQ /DRU Ŗ %QORCVKDNG YKVJ VJG D UVCPFCTF VQ RTQXKFG C YKTGNGUU FCVC TCVG QH WR VQ /DRU CNNQYKPI [QW VQ OKITCVG [QWT U[UVGO VQ VJG P FTCHV CPF
Section 2 - Installation Wireless Basics & .KPM YKTGNGUU RTQFWEVU CTG DCUGF QP KPFWUVT[ UVCPFCTFU VQ RTQXKFG JKIJ URGGF YKTGNGUU EQPPGEVKXKV[ VJCV KU GCU[ VQ WUG YKVJKP [QWT JQOG DWUKPGUU QT RWDNKE CEEGUU YKTGNGUU PGVYQTMU & .KPM YKTGNGUU RTQFWEVU RTQXKFGU [QW YKVJ CEEGUU VQ VJG FCVC [QW YCPV YJGPGXGT CPF YJGTGXGT [QW YCPV KV 'PLQ[ VJG HTGGFQO VJCV YKTGNGUU PGVYQTMKPI ECP DTKPI VQ you. 9.
Section 2 - Installation Standards-Based Technology 6JG 9KTGNGUU #EEGUU 2QKPV WVKNK\GU VJG D I CPF P FTCHV UVCPFCTFU 6JG +''' P FTCHV UVCPFCTF KU CP GZVGPUKQP QH VJG D CPF I UVCPFCTFU VJCV ECOG DGHQTG KV +V KPETGCUGU VJG OCZKOWO YKTGNGUU UKIPCN TCVG WR VQ /DRU YKVJKP )*\ DCPFU WVKNK\KPI 1(&/ VGEJPQNQI[ 6JKU OGCPU VJCV KP OQUV GPXKTQPOGPVU YKVJKP VJG URGEKſGF TCPIG QH VJKU FGXKEG [QW YKNN DG CDNG VQ VTCPUHGT NCTIG ſNGU SWKEMN[ QT GXGP YC
Section 2 - Installation Wireless Installation Considerations The D-Link AirPremier N wireless access point lets you access your network using a wireless connection from virtually CP[YJGTG YKVJKP VJG QRGTCVKPI TCPIG QH [QWT YKTGNGUU PGVYQTM -GGR KP OKPF JQYGXGT VJCV VJG PWODGT VJKEMPGUU CPF NQECVKQP QH YCNNU EGKNKPIU QT QVJGT QDLGEVU VJCV VJG YKTGNGUU UKIPCNU OWUV RCUU VJTQWIJ OC[ NKOKV VJG TCPIG 6[RKECN TCPIGU XCT[ FGRGPFKPI QP VJG V[RGU QH OCVGTKCNU CPF DCEMITQWPF 4( TCFKQ HTGSWGPE[ PQKUG KP
Section 2 - Installation Four Operational Modes D-Link DAP-1353 User Manual Access Point (AP) Create a wireless LAN WDS with AP Wirelessly connect multiple networks while still functioning as a wireless AP WDS Wirelessly connect multiple networks Wireless Client AP acts as a wireless network adapter for your Ethernet-enabled device 11
Section 2 - Installation Getting Started ;QW YKNN PGGF DTQCFDCPF +PVGTPGV CEEGUU %QPUWNV YKVJ [QWT ECDNG QT &5. RTQXKFGT HQT RTQRGT KPUVCNNCVKQP QH VJG OQFGO %QPPGEV VJG ECDNG QT &5. OQFGO VQ C TQWVGT 5GG VJG RTKPVGF +PUVCNN )WKFG KPENWFGF YKVJ [QWT TQWVGT +H [QW CTG EQPPGEVKPI C FGUMVQR EQORWVGT VQ [QWT PGVYQTM KPUVCNN C YKTGNGUU 2%+ CFCRVGT KPVQ CP CXCKNCDNG PCI slot on your desktop computer. 5. Install the drivers for your wireless CardBus adapter into a laptop computer.
Section 2 - Installation %QPPGEV QPG GPF QH CP 'VJGTPGV ECDNG KPENWFGF YKVJ [QWT RCEMCIG VQ VJG .
Section 3 - Configuration Configuration 6Q EQPſIWTG VJG WUG C EQORWVGT VJCV KU EQPPGEVGF VQ VJG YKVJ CP 'VJGTPGV ECDNG UGG VJG Network Layout diagram (KTUV FKUCDNG VJG Access the Internet using a proxy server HWPEVKQP 6Q FKUCDNG VJKU HWPEVKQP IQ VQ Control Panel > Internet Options > Connections > LAN Settings CPF WPEJGEM VJG GPCDNG DQZ 5VCTV [QWT YGD DTQYUGT RTQITCO +PVGTPGV 'ZRNQTGT /Q\KNNC (KTGHQZ 6[RG VJG +2 CFFTGUU CPF JVVR RQTV QH VJG KP VJG CFFTGUU ſGNF http:/
Section 3 - Configuration #HVGT UWEEGUUHWNN[ NQIIKPI KPVQ VJG VJG HQNNQYKPI UETGGP YKNN CRRGCT 9JGP OCMKPI EJCPIGU QP OQUV QH VJG EQPſIWTCVKQP UETGGPU KP VJKU UGEVKQP WUG VJG Apply DWVVQP CV VJG DQVVQO QH GCEJ UETGGP VQ UCXG [QWT EQPſIWTCVKQP EJCPIGU Click the Apply DWVVQP VQ EQPſIWTG EJCPIGU D-Link DAP-1353 User Manual 15
Section 3 - Configuration Home > Basic Settings Wireless Access Point mode Wireless Band: 2.4 GHz Mode: Select Access Point from the pull-down menu. The other three choices are WDS with AP, WDS, and Wireless Client. Network Name 5GTXKEG 5GV +FGPVKHKGT 55+& KU VJG PCOG (SSID): FGUKIPCVGF HQT C URGEKſE YKTGNGUU NQECN CTGC PGVYQTM 9.
Section 3 - Configuration Channel Width: Allows you to select the channel width you would like to operate in. Select 20 MHz if you are not using any 802.11n wireless clients. Auto 20/40 MHz CNNQYU [QW VQ EQPPGEV VQ DQVJ P CPF D I YKTGNGUU FGXKEGU QP [QWT PGVYQTM Authentication: 7UG VJG RWNN FQYP OGPW VQ EJQQUG Open System, Shared Key, WPA-Personal, or WPA-Enterprise. Select Open System to communicate the key across the network.
Section 3 - Configuration WDS with AP mode In WDS with AP mode, the DAP-1353 wirelessly connects multiple networks while still functioning as a wireless AP. Wireless Band: 2.4GHz. Mode: WDS with AP mode is selected from the pull-down menu. Network Name 5GTXKEG 5GV +FGPVKſGT 55+& KU VJG PCOG FGUKIPCVGF HQT C (SSID): URGEKſE YKTGNGUU NQECN CTGC PGVYQTM 9.
Section 3 - Configuration Remote AP MAC 'PVGT VJG /#% CFFTGUUGU QH VJG #2U QP [QWT PGVYQTM VJCV YKNN UGTXG CU DTKFIGU VQ YKTGNGUUN[ EQPPGEV OWNVKRNG PGVYQTMU Address: Site Survey: Click on the Scan DWVVQP VQ UGCTEJ HQT CXCKNCDNG YKTGNGUU PGVYQTMU VJGP ENKEM QP VJG CXCKNCDNG PGVYQTM VJCV [QW YCPV VQ connect with. Authentication: 7UG VJG RWNN FQYP OGPW VQ EJQQUG Open System, Shared Key, or WPA-Personal. Select Open System to communicate the key across the network.
Section 3 - Configuration WDS mode In WDS mode, the DAP-1353 wirelessly connects multiple networks, without functioning as a wireless AP. Wireless Band: 2.4GHz. Mode: WDS is selected from the pull-down menu. Network Name 5GTXKEG 5GV +FGPVKHKGT 55+& KU VJG PCOG (SSID): designated for a specific wireless local area PGVYQTM 9.
Section 3 - Configuration Site Survey: Click on the Scan DWVVQP VQ UGCTEJ HQT CXCKNCDNG YKTGNGUU PGVYQTMU VJGP ENKEM QP VJG CXCKNCDNG PGVYQTM VJCV [QW YCPV VQ connect with. Authentication: 7UG VJG RWNN FQYP OGPW VQ EJQQUG Open System, Shared Key, or WPA-Personal. Select Open System to communicate the key across the network. Select Shared Key to limit communication to only those devices that share the same WEP settings.
Section 3 - Configuration Wireless Client mode Wireless Band: 2.4 GHz Mode: Wireless Client is selected from the pull-down menu. Network Name 5GTXKEG 5GV +FGPVKſGT 55+& KU VJG PCOG FGUKIPCVGF (SSID): HQT C URGEKſE YKTGNGUU NQECN CTGC PGVYQTM 9.#0 The SSID’s factory default setting is dlink. The SSID ECP DG GCUKN[ EJCPIGF VQ EQPPGEV VQ CP GZKUVKPI wireless network. SSID Visibility: 6JKU QRVKQP KU WPCXCKNCDNG KP Wireless Client mode.
Section 3 - Configuration Open System/Shared Key Authentication Encryption: 7UG VJG TCFKQ DWVVQP VQ FKUCDNG QT GPCDNG encryption. Key Type*: Select HEX or ASCII. Key Size: Select 64 Bits or 128 Bits. Key Index (1-4): 5GNGEV VJG UV VJTQWIJ VJG VJ MG[ VQ DG VJG active key. Key: Input up to four keys for encryption. You will select one of these keys in the Key Index pull-down menu. **Hexadecimal (HEX) digits consist of the numbers 0-9 and the letters A-F.
Section 3 - Configuration WPA-Personal authentication WPA Mode: When WPA-Personal is selected for Authentication type, you must also select a WPA mode from the pullFQYP OGPW AUTO (WPA or WPA2), WPA2 Only, or WPA Only. WPA and WPA2 use different algorithms. AUTO (WPA or WPA2) CNNQYU [QW VQ WUG DQVJ 92# and WPA2. Cipher Type: When you select WPA-Personal, you must also select AUTO, AES, or TKIP from the pull down menu. Group Key 5GNGEV VJG KPVGTXCN FWTKPI YJKEJ VJG ITQWR MG[ YKNN DG Update: valid.
Section 3 - Configuration WPA-Enterprise authentication WPA Mode: When WPA-Enterprise is selected, you must also UGNGEV C 92# OQFG HTQO VJG RWNN FQYP OGPW AUTO (WPA or WPA2), WPA2 Only, or WPA Only. WPA and WPA2 use different algorithms. AUTO (WPA or WPA2) CNNQYU [QW VQ WUG DQVJ 92# CPF 92# Cipher Type: When WPA-Enterprise is selected, you must also UGNGEV C EKRJGT V[RG HTQO VJG RWNN FQYP OGPW Auto, AES, or TKIP.
Section 3 - Configuration LAN LAN is short for Local Area Network. This is considered your internal network. These are the IP settings of the LAN interface for the DAP-1353. These settings may DG TGHGTTGF VQ CU RTKXCVG UGVVKPIU ;QW OC[ EJCPIG the LAN IP address if needed. The LAN IP address is RTKXCVG VQ [QWT KPVGTPCN PGVYQTM CPF ECPPQV DG UGGP on the Internet. Get IP From: Static IP (Manual) is chosen here.
Section 3 - Configuration Home > Advanced Settings Performance Wireless: 7UG VJG RWNN FQYP OGPW VQ VWTP VJG YKTGNGUU HWPEVKQP On or Off. Wireless Mode: 6JG FKHHGTGPV EQODKPCVKQP QH ENKGPVU VJCV ECP DG UWRRQTVGF KPENWFG Mixed 802.11n, 802.11g and 802.11b, Mixed 802.11g and 802.11b and 802.11n Only KP VJG )*\ DCPF 2NGCUG PQVG VJCV YJGP DCEMYCTFU EQORCVKDKNKV[ KU GPCDNGF HQT NGICE[ I D ENKGPVU FGITCFCVKQP QH P FTCHV YKTGNGUU RGTHQTOCPEG KU GZRGEVGF Data Rate*: +PFKECVG VJG
Section 3 - Configuration Beacon Interval $GCEQPU CTG RCEMGVU UGPV D[ CP CEEGUU RQKPV VQ U[PEJTQPK\G C YKTGNGUU PGVYQTM 5RGEKH[ C XCNWG KP OKNNKUGEQPFU 6JG (25-500): FGHCWNV 100 KU TGEQOOGPFGF 5GVVKPI C JKIJGT DGCEQP KPVGTXCN ECP JGNR VQ UCXG VJG RQYGT QH YKTGNGUU ENKGPVU YJKNG UGVVKPI a lower one can help a wireless client connect to an access point faster. DTM Interval 5GNGEV C &GNKXGT[ 6TCHſE +PFKECVKQP /GUUCIG UGVVKPI DGVYGGP 1 and 15. 1 is the default setting.
Section 3 - Configuration Multi-SSID The device supports up to four multiple Service Set +FGPVKſGTU ;QW ECP UGV VJG 2TKOCT[ 55+& KP VJG Basic > Wireless section. The SSID’s factory default setting is dlink 6JG 55+& ECP DG GCUKN[ EJCPIGF VQ EQPPGEV VQ CP GZKUVKPI YKTGNGUU PGVYQTM QT VQ GUVCDNKUJ C PGY wireless network. Enable Multi-SSID: %JGEM VQ GPCDNG UWRRQTV HQT OWNVKRNG 55+&U Band: 6JKU TGCF QPN[ XCNWG KU VJG EWTTGPV DCPF setting. Index: You can select up to three multi-SSIDs.
Section 3 - Configuration WMM (Wi-Fi Multimedia): Encryption: Select Enable or Disable. When you select Open System VQIING DGVYGGP Enable and Disable. If Enable KU UGNGEVGF VJG -G[ 6[RG -G[ 5K\G -G[ +PFGZ ` -G[ CPF %QPſTO -G[U OWUV CNUQ DG EQPſIWTGF Key Type: Select HEX or ASCII. Key Size: Select 64 Bits or 128 Bits. Key Index (1-4): Key: WPA Mode: Cipher Type: Group Key Update Interval: 5GNGEV HTQO VJG UV VQ VJ MG[ VQ DG UGV CU VJG CEVKXG MG[ Input up to four keys for encryption.
Section 3 - Configuration VLAN VLAN List 6JG UWRRQTVU 8.#0U 8.#0U ECP DG ETGCVGF YKVJ C 0COG CPF 8+& /IOV 6%2 UVCEM .#0 2TKOCT[ /WNVKRNG 55+& CPF 9&5 EQPPGEVKQP ECP DG CUUKIPGF to VLANs as they are physical ports. Any packet which enters the DAP-1353 without a VLAN tag will have a VLAN tag inserted with a PVID. 6JG 8.#0 .KUV VCD FKURNC[U VJG EWTTGPV 8.#0U VLAN Status: 7UG VJG TCFKQ DWVVQP VQ VQIING DGVYGGP Enable or Disable.
Section 3 - Configuration Port List 6JG 2QTV .KUV VCD FKURNC[U VJG EWTTGPV RQTVU +H [QW YCPV VQ EQPſIWTG VJG IWGUV CPF KPVGTPCN PGVYQTMU QP C 8KTVWCN .#0 8.#0 VJG UYKVEJ CPF &*%2 UGTXGT [QW CTG using must also support VLANs. As a prerequisite step, EQPſIWTG C RQTV QP VJG UYKVEJ HQT JCPFNKPI 8.
Section 3 - Configuration Add/Edit VLAN The Add/Edit VLAN VCD KU WUGF VQ EQPſIWTG 8.#0U Once you have made the desired changes, click the Apply DWVVQP VQ NGV [QWT EJCPIGU VCMG GHHGEV VLAN Status: VLAN ID: VLAN Name: 7UG VJG TCFKQ DWVVQP VQ VQIING VQ 'PCDNG 2TQXKFG C PWODGT DGVYGGP 1 and 4094 for the Internal VLAN. Enter the VLAN to add or modify.
Section 3 - Configuration PVID Setting The PVID Setting VCD KU WUGF VQ GPCDNG FKUCDNG VJG 2QTV 8.#0 +FGPVKſGT #WVQ #UUKIP 5VCVWU CU YGNN CU VQ EQPſIWTG XCTKQWU V[RGU QH 28+& UGVVKPIU %NKEM VJG Apply DWVVQP VQ NGV [QWT EJCPIGU VCMG GHHGEV VLAN Status: 7UG VJG TCFKQ DWVVQP VQ VQIING DGVYGGP Enable and Disable.
Section 3 - Configuration Intrusion The Wireless Intrusion Protection window is used to set APs as All, Valid, Neighborhood, Rogue, and New. Click the Apply DWVVQP VQ NGV [QWT EJCPIGU VCMG effect. AP List: The choices include All, Valid, Neighbor, Rogue, and New. Detect: %NKEM VJKU DWVVQP VQ KPKVKCVG C UECP QH VJG network.
Section 3 - Configuration Schedule The Wireless Schedule Settings window is used to add and modify scheduling rules on the device. Click the Apply DWVVQP VQ NGV [QWT EJCPIGU VCMG GHHGEV Wireless Schedule: 7UG VJG RWNN FQYP OGPW VQ GPCDNG VJG FGXKEGŏU scheduling feature. Name: Enter a name for the new scheduling rule in the ſGNF RTQXKFGF Day(s): 6QIING VJG TCFKQ DWVVQP DGVYGGP All Week and Select Day(s). If the second option is selected, EJGEM VJG URGEKſE FC[U [QW YCPV VJG TWNG VQ DG effective on.
Section 3 - Configuration QoS 3WCNKV[ QH 5GTXKEG 3Q5 GPJCPEGU VJG GZRGTKGPEG QH WUKPI C PGVYQTM D[ RTKQTKVK\KPI VJG VTCHſE QH FKHHGTGPV applications.
Section 3 - Configuration Name: Priority: Protocol: Host 1 IP Range: Host 1 Port Range: Host 2 IP Range: Host 2 Port Range: 'PVGT C PCOG HQT VJG PGY 3Q5 TWNG KP VJG ſGNF RTQXKFGF 7UG VJG RWNN FQYP OGPW VQ UGNGEV VJG FGUKTGF RTKQTKV[ Background (BK), Best Effort (BE), Video (VI), or Voice (VO). 7UG VJG RWNN FQYP OGPW VQ EJQQUG VJG CRRTQRTKCVG RTQVQEQN WUGF D[ VJG OGUUCIGU Any, TCP, UDP, Both, IMCP, or Other.
Section 3 - Configuration DHCP Server Dynamic Pool Settings 6JG &*%2 CFFTGUU RQQN FGſPGU VJG TCPIG QH VJG +2 CFFTGUU VJCV ECP DG CUUKIPGF VQ UVCVKQPU KP VJG network.
Section 3 - Configuration DNS: Domain Name: Lease Time (60-31536000 sec): 'PVGT VJG +2 CFFTGUU QH VJG &QOCKP 0COG 5[UVGO &05 UGTXGT 6JG &05 UGTXGT VTCPUNCVGU FQOCKP PCOGU UWEJ CU www.dlink.com into IP addresses.
Section 3 - Configuration Static Pool Setting 6JG &*%2 CFFTGUU RQQN FGſPGU VJG TCPIG QH +2 CFFTGUUGU VJCV ECP DG CUUKIPGF VQ UVCVKQPU QP VJG PGVYQTM # UVCVKE RQQN CNNQYU URGEKſE YKTGNGUU UVCVKQPU VQ TGEGKXG C ſZGF +2 YKVJQWV VKOG EQPVTQN Function Enable/ Disable: &[PCOKE *QUV %QPſIWTCVKQP 2TQVQEQN &*%2 assigns IP addresses to wireless devices on VJG PGVYQTM 6JKU RTQVQEQN UKORNKſGU PGVYQTM management and allows new wireless devices to receive IP addresses automatically without
Section 3 - Configuration Gateway: 5RGEKH[ VJG )CVGYC[ CFFTGUU HQT VJG YKTGNGUU PGVYQTM WINS: Specify the Windows Internet Naming Service 9+05 UGTXGT CFFTGUU HQT VJG YKTGNGUU PGVYQTM 9INS is a system that FGVGTOKPGU VJG +2 CFFTGUU QH C PGVYQTM EQORWVGT YKVJ C F[PCOKECNN[ CUUKIPGF +2 CFFTGUU KH CRRNKECDNG DNS: 'PVGT VJG &QOCKP 0COG 5[UVGO &05 UGTXGT CFFTGUU HQT VJG YKTGNGUU PGVYQTM 6JG &05 UGTXGT VTCPUNCVGU FQOCKP PCOGU such as www.dlink.com into IP addresses.
Section 3 - Configuration Current IP Mapping List 6JKU YKPFQY FKURNC[U KPHQTOCVKQP CDQWV VJG EWTTGPV assigned DHCP dynamic and static IP address pools. 6JKU KPHQTOCVKQP KU CXCKNCDNG YJGP [QW GPCDNG &*%2 server on the AP and assign dynamic and static IP address pools. Current DHCP Dynamic Profile: These are IP address pools the DHCP server has assigned using the dynamic pool setting.
Section 3 - Configuration Filters Wireless MAC ACL Wireless Band: &KURNC[U VJG EWTTGPV YKTGNGUU DCPF TCVG Access Control List: Select Disable VQ FKUCDNG VJG ſNVGTU HWPEVKQP Select Accept to accept only those devices with MAC addresses in the Access Control .KUV #NN QVJGT FGXKEGU PQV QP VJG NKUV YKNN DG rejected. Select Reject to reject the devices with MAC addresses on the Access Control List.
Section 3 - Configuration WLAN Partition Wireless Band: &KURNC[U VJG EWTTGPV YKTGNGUU DCPF TCVG Internal Station Connection: The default value is Enable, which allows UVCVKQPU VQ KPVGT EQOOWPKECVG D[ EQPPGEVKPI VQ C VCTIGV #2 9JGP FKUCDNGF YKTGNGUU UVCVKQPU cannot exchange data through the AP. Ethernet WLAN Access: The default is Enable 9JGP FKUCDNGF CNN FCVC from the Ethernet to associated wireless devices YKNN DG DNQEMGF 9KTGNGUU FGXKEGU ECP UVKNN UGPF data to the Ethernet.
Section 3 - Configuration Home > Status Device Information Device 6JKU TGCF QPN[ YKPFQY FKURNC[U VJG EQPſIWTCVKQP Information: UGVVKPIU QH VJG KPENWFKPI VJG ſTOYCTG version and the device's MAC address.
Section 3 - Configuration Client Information Client Information: This window displays the wireless client information for clients currently connected to the DAP-1353. 6JG HQNNQYKPI KPHQTOCVKQP KU CXCKNCDNG HQT GCEJ ENKGPV communicating with the DAP-1353. SSID: Displays the SSID of the client. MAC: Displays the MAC address of the client. Band: &KURNC[U VJG YKTGNGUU DCPF VJCV VJG ENKGPV KU connected to. Authentication: &KURNC[U VJG V[RG QH CWVJGPVKECVKQP DGKPI used.
Section 3 - Configuration WDS Information WDS Information: 6JKU YKPFQY FKURNC[U VJG 9KTGNGUU &KUVTKDWVKQP System information for clients currently connected to the DAP-1353. 6JG HQNNQYKPI KPHQTOCVKQP KU CXCKNCDNG HQT GCEJ ENKGPV communicating with the DAP-1353. Name: MAC: Authentication: Displays the SSID of the client. Displays the MAC address of the client. &KURNC[U VJG V[RG QH CWVJGPVKECVKQP DGKPI used. Signal: Displays the client's signal strength.
Section 3 - Configuration Stats Ethernet Ethernet Traffic Statistics: This page displays transmitted and received EQWPV UVCVKUVKEU HQT RCEMGVU CPF D[VGU D-Link DAP-1353 User Manual 49
Section 3 - Configuration WLAN WLAN Traffic Statistics: This page displays wireless network statistics for data throughput, transmitted and received frames, and frame errors.
Section 3 - Configuration Log View Log View Log: 6JG #2ŏU GODGFFGF OGOQT[ FKURNC[U U[UVGO and network messages including a time stamp and message type. The log information KPENWFGU DWV KU PQV NKOKVGF VQ VJG HQNNQYKPI KVGOU EQNF UVCTV #2 WRITCFKPI ſTOYCTG client associate and disassociate with AP, CPF YGD NQIKP 6JG YGD RCIG JQNFU WR VQ 500 logs.
Section 3 - Configuration Log Settings Log Server/IP Address: Enter the IP address of the server you would like to send the DAP-1353 log to. Log Type: %JGEM VJG DQZ HQT VJG V[RG QH CEVKXKV[ [QW YCPV VQ NQI 6JGTG CTG VJTGG V[RGU 5[UVGO #EVKXKV[ Wireless Activity, and Notice.
Section 3 - Configuration Maintenance Administrator Settings Check one or more of the five main categories to display the various hidden administrator parameters CPF UGVVKPIU FKURNC[GF QP VJG PGZV ſXG RCIGU D-Link DAP-1353 User Manual 53
Section 3 - Configuration Limit Administrator Each of the five main categories display various hidden administrator parameters and settings. Limit Administrator VLAN ID: %JGEM VJG DQZ RTQXKFGF CPF VJG GPVGT VJG URGEKſE 8.#0 +& VJCV VJG CFOKPKUVTCVQT YKNN DG allowed to log in from. Limit Administrator IP: %JGEM VQ GPCDNG VJG .KOKV #FOKPKUVTCVQT +2 address.
Section 3 - Configuration System Name Settings Each of the five main categories display various hidden administrator parameters and settings. System Name: The name of the device. The default name is D-Link DAP-1353. Location: The physical location of the device, e.g. 72nd Floor, D-Link HQ.
Section 3 - Configuration Login Settings Each of the five main categories display various hidden administrator parameters and settings. User Name: Enter a user name. The default is admin. Old Password: When changing your password, enter the old password here. New Password: When changing your password, enter the new password here. The password is case-sensitive.
Section 3 - Configuration Console Settings Each of the five main categories display various hidden administrator parameters and settings. Status: 5VCVWU KU GPCDNGF D[ FGHCWNV 7PEJGEM VJG DQZ VQ FKUCDNG VJG EQPUQNG Console Protocol: Select the type of protocol you would like to use, Telnet or SSH. Timeout: Set to 1 Min, 3 Mins, 5 Mins, 10 Mins, 15 Mins or Never.
Section 3 - Configuration SNMP Settings Each of the five main categories display various hidden administrator parameters and settings. Status: %JGEM VJG DQZ VQ GPCDNG VJG 50/2 HWPEVKQPU 6JKU KU GPCDNGF D[ FGHCWNV Public Community String: 'PVGT VJG RWDNKE 50/2 EQOOWPKV[ UVTKPI Private Community String: Enter the private SNMP community string.
Section 3 - Configuration Firmware and SSL Certification Upload Upload Firmware From Local Hard Drive: The current firmware version is displayed CDQXG VJG ſNG NQECVKQP ſGNF #HVGT FQYPNQCFKPI VJG OQUV TGEGPV XGTUKQP QH ſTOYCTG HQT VJG HTQO JVVR UWRRQTV FNKPM EQO VQ your local computer, use the Browse DWVVQP VQ NQECVG VJG ſTOYCTG ſNG QP [QWT EQORWVGT %NKEM Upload VQ WRFCVG VJG ſTOYCTG XGTUKQP 2NGCUG don’t turn the power off while upgrading.
Section 3 - Configuration Configuration File Upload File: Click the Browse DWVVQP VQ NQECVG C RTGXKQWUN[ UCXGF EQPſIWTCVKQP ſNG QP [QWT NQECN EQORWVGT #HVGT UGNGEVKPI VJG ſNG ENKEM Upload to apply the EQPſIWTCVKQP UGVVKPIU VQ VJG Download Configuration File: Click Download to save the current DAP-1353 configuration to your local computer.
Section 3 - Configuration Time and Date Current Time: Displays the current time and date settings. Time Zone: 7UG VJG RWNN FQYP OGPW VQ UGNGEV [QWT EQTTGEV 6KOG
Section 3 - Configuration System System Settings Restart the Device: Restore to Factory Default Settings: Click Restart to restart the DAP-1353. Click Restore VQ TGUVQTG VJG DCEM to factory default settings.
Section 3 - Configuration Help Help: Scroll down the Help page for topics and explanations.
Section 6 - Troubleshooting Troubleshooting 6JKU EJCRVGT RTQXKFGU UQNWVKQPU VQ RTQDNGOU VJCV ECP QEEWT FWTKPI VJG KPUVCNNCVKQP CPF QRGTCVKQP QH VJG 4GCF VJG HQNNQYKPI FGUETKRVKQPU KH [QW CTG JCXKPI RTQDNGOU 6JG GZCORNGU DGNQY CTG KNNWUVTCVGF KP 9KPFQYU® XP. If [QW JCXG C FKHHGTGPV QRGTCVKPI U[UVGO VJG UETGGPUJQVU QP [QWT EQORWVGT YKNN NQQM UKOKNCT VQ VJG HQNNQYKPI GZCORNGU 9J[ ECPŏV + CEEGUU VJG YGD DCUGF EQPſIWTCVKQP WVKNKV[! 9JGP GPVGTKPI VJG +2 CFFTGUU QH VJG & .
Section 6 - Troubleshooting Ŗ %QPſIWTG [QWT +PVGTPGV UGVVKPIU Ŗ )Q VQ Start > Settings > Control Panel &QWDNG ENKEM VJG Internet Options Icon. From the Security VCD ENKEM VJG DWVVQP VQ TGUVQTG VJG UGVVKPIU VQ VJGKT FGHCWNVU Ŗ %NKEM VJG Connection VCD CPF UGV VJG FKCN WR QRVKQP VQ 0GXGT &KCN C %QPPGEVKQP %NKEM VJG .#0 5GVVKPIU DWVVQP /CMG UWTG PQVJKPI KU EJGEMGF %NKEM OK. Ŗ )Q VQ VJG Advanced VCD CPF ENKEM VJG DWVVQP VQ TGUVQTG VJGUG UGVVKPIU VQ VJGKT FGHCWNVU %NKEM OK three times.
Appendix B - Networking Basics Networking Basics Check your IP address #HVGT [QW KPUVCNN [QWT PGVYQTM CFCRVGT D[ FGHCWNV VJG 6%2 +2 UGVVKPIU UJQWNF DG UGV VQ QDVCKP CP +2 CFFTGUU HTQO C &*%2 UGTXGT K G YKTGNGUU TQWVGT CWVQOCVKECNN[ 6Q XGTKH[ [QWT +2 CFFTGUU RNGCUG HQNNQY VJG UVGRU DGNQY Click on Start > Run +P VJG TWP DQZ V[RG cmd and click OK. At the prompt, type ipconfig and press Enter. 6JKU YKNN FKURNC[ VJG +2 CFFTGUU UWDPGV OCUM CPF the default gateway of your adapter. If the address is 0.
Appendix B - Networking Basics Statically Assign an IP address +H [QW CTG PQV WUKPI C &*%2 ECRCDNG ICVGYC[ TQWVGT QT [QW PGGF VQ CUUKIP C UVCVKE +2 CFFTGUU RNGCUG HQNNQY VJG UVGRU DGNQY Step 1 Windows® %NKEM QP Start > Settings > Control Panel > Network Connections 9KPFQYU :2 %NKEM QP Start > Control Panel > Network Connections Windows Vista® %NKEM QP Start > Control Panel > Network and Internet > Network and Sharing Center > Manage network connections Step 2 Right-click on the Local Area Conne
Appendix B - Networking Basics Set Primary DNS the same as the LAN IP address of your router 6JG 5GEQPFCT[ &05 KU PQV PGGFGF QT [QW OC[ enter a DNS server from your ISP. Step 5 Click OK twice to save your settings.
This device complies with RSS 210 of Industry Canada. " Operation is subject to the following two conditions : (1) this device may not cause interference , and (2) this device must accept any interference , including interference that may cause undesired operation of the device .
NCC Warning Statement Article 12 Without permission, any company, firm or user shall not alter the frequency, increase the power, or change the characteristics and functions of the original design of the certified lower power frequency electric machinery.
