User's Manual

41D-Link DAP-1360L User Manual
Section 3 - Conguration
Enable Wireless:
Wireless Mode:
Site Survey:
Wireless Network
Name:
802.11 Mode:
Wireless Channel:
Enable Auto Scan:
Channel Width:
Visibility Status:
Wireless Security
Mode:
Select this to turn the Wi-Fi module on and o.
Use the drop-down box to select if you want to
use a schedule. Click Add New to add or change
a schedule.
Select WISP Client or WISP Repeater from the
drop-down menu.
Click this button to choose the root AP from an
available connection list. If the root AP has wireless
encryption, you have to use the same wireless
security mode to connect the root AP.
You can input the wireless network name of the
root AP or click the Site Survey button to nd the
root AP.
Select the appropriate 802.11 mode based
on the wireless clients in your network. The
drop-down menu options are 802.11g Only, Mixed
802.11b/g, 802.11b Only, 802.11n Only, or Mixed
802.11b/g/n.
The channel used will be displayed. The channel
will follow the root AP.
The Auto Channel Scan setting can be selected to allow the DAP-1360L to choose the channel with the least amount of interference.
Select the appropriate channel width between 20MHz or Auto 20/40MHz from the drop-down menu.
Check the box if you do not want the SSID to be broadcast by the DAP-1360L. This prevents the SSID from being seen by site
survey utilities, so any wireless clients will have to be pre-congured with the SSID of the DAP-1360L in order to connect to it.
Select a wireless security setting. Options are None, WEP, WPA, or WPA2. Refer to the Wireless Security section of this manual for
a detailed explanation of the wireless security options.
WISP Client Router/WISP Repeater Modes