User's Manual

15D-Link DAP-2320 User Manual

Section 3 - Conﬁguration

Conﬁguration

To conﬁgure the DAP-2320, use a computer that is connected to the DAP-2320 with an Ethernet cable (see the

Network Layout diagram

First, disable the Access the Internet using a proxy server function. To disable this function, go to Control

Panel > Internet Options > Connections > LAN Settings and uncheck the enable box.

Launch your web browser.

Type the IP address and http port of the DAP-2320 in the address field

(http://192.168.0.50) and press Enter. Make sure that the IP addresses of the

DAP-2320 and your computer are in the same subnet.

Note: If you have changed the default IP address assigned to the DAP-2320,

make sure to enter the correct IP address.

Enter the user name (admin) and your password. Leave the password ﬁeld blank by default, and click Login.

Note: If you have changed the password,

make sure to enter the correct password.