User's Manual

45D-Link DAP-2320 User Manual
Section 3 - Configuration
DHCP Server
Dynamic Pool Settings
The DHCP address pool defines the range of the IP address that can be assigned to stations in the network. A Dynamic
Pool allows wireless stations to receive an available IP with lease time control. If needed or required in the network,
the DAP-2320 is capable of acting as a DHCP server.
Dynamic Host Configuration Protocol (DHCP)
assigns dynamic IP addresses to devices on
the network. This protocol simplifies network
management and allows new wireless devices
to receive IP addresses automatically without
the need to manually assign new IP addresses.
Select Enable to allow the DAP-2320 to function
as a DHCP server.
Input the first IP address available for assignment
on your network.
Enter the number of IP addresses available for
assignment. IP addresses are increments of
the IP address specified in the “IP Assigned
From” field.
All devices in the network must have the
same subnet mask to communicate. Enter the
submask for the network here.
Function Enable/
Disable:
IP Assigned
From:
The Range of
Pool (1-254):
Subnet Mask:
Gateway:
WINS:
DAP-2320
Enter the IP address of the gateway on the network.
Specify the Windows Internet Naming Service (WINS) server address for the wireless network. WINS is a system that
determines the IP address of a network computer that has a dynamically assigned IP address.