User's Manual
Table Of Contents
- Product Overview
- Hardware Overview
- Basic Installation
- Web User Interface
- Basic Settings
- Access Point Mode (2.4GHz) - Open System
- Access Point Mode (2.4GHz) - Shared Key
- Access Point Mode (2.4GHz) - WPA Personal
- Access Point Mode (2.4GHz) - WPA Enterprise
- Access Point Mode (2.4GHz) - 802.1X
- Access Point Mode (5GHz)
- WDS with AP Mode (2.4GHz)
- WDS with AP Mode (5GHz)
- WDS Mode (2.4GHz)
- WDS Mode (5GHz)
- Wireless Client Mode (2.4GHz)
- Wireless Client Mode (5GHz)
- Advanced Settings
- VLAN List
- Port List
- Add/Edit VLAN
- PVID Settings
- AP Array Scan
- Configuration Settings
- Auto-RF
- Load Balance
- Authentication Settings - Ticket
- Authentication Settings - User/Password
- Authentication Settings - Remote RADIUS
- Authentication Settings - LDAP
- Authentication Settings - POP3
- Login Page Upload
- Web Redirection
- Dynamic Pool Settings
- Static Pool Setting
- Current IP Mapping List
- Wireless MAC ACL
- WLAN Partition
- Uplink/Downlink Settings
- QoS
- Traffic Manager
- Status
- Stats Page
- Log
- Maintenance Section
- Administration
- Configuration and System
- System Settings
- Help
- Knowledge Base
- Troubleshooting
- Technical Specifications
D-Link DAP-2660 User Manual
18
Backup RADIUS Server:
Backup RADIUS Port:
Backup RADIUS Secret:
Accounting Mode:
Primary Accounting
Server:
Primary Accounting
Port:
Primary Accounting
Secret:
Backup Accounting
Server:
Backup Accounting
Port:
Backup Accounting
Secret:
Enter the backup RADIUS server’s IP address or domain name here.
Enter the backup RADIUS server’s port number here.
Enter the backup RADIUS server’s secrect passphrase here. This secrect is in the ASCII form.
Select to Enable or Disable the RADIUS accounting mode here.
Enter the primary accounting server’s IP address or domain name here.
Enter the primary accounting server’s port number here.
Enter the primary accounting server’s secrect passphrase here. This secrect is in the ASCII form.
Enter the backup accounting server’s IP address or domain name here.
Enter the backup accounting server’s port number here.
Enter the backup accounting server’s secrect passphrase here. This secrect is in the ASCII form.