User's Manual
Table Of Contents
- Product Overview
- Hardware Overview
- Basic Installation
- Web User Interface
- Basic Settings
- Access Point Mode (2.4GHz) - Open System
- Access Point Mode (2.4GHz) - Shared Key
- Access Point Mode (2.4GHz) - WPA Personal
- Access Point Mode (2.4GHz) - WPA Enterprise
- Access Point Mode (2.4GHz) - 802.1X
- Access Point Mode (5GHz)
- WDS with AP Mode (2.4GHz)
- WDS with AP Mode (5GHz)
- WDS Mode (2.4GHz)
- WDS Mode (5GHz)
- Wireless Client Mode (2.4GHz)
- Wireless Client Mode (5GHz)
- Advanced Settings
- VLAN List
- Port List
- Add/Edit VLAN
- PVID Settings
- AP Array Scan
- Configuration Settings
- Auto-RF
- Load Balance
- Authentication Settings - Ticket
- Authentication Settings - User/Password
- Authentication Settings - Remote RADIUS
- Authentication Settings - LDAP
- Authentication Settings - POP3
- Login Page Upload
- Web Redirection
- Dynamic Pool Settings
- Static Pool Setting
- Current IP Mapping List
- Wireless MAC ACL
- WLAN Partition
- Uplink/Downlink Settings
- QoS
- Traffic Manager
- Status
- Stats Page
- Log
- Maintenance Section
- Administration
- Configuration and System
- System Settings
- Help
- Knowledge Base
- Troubleshooting
- Technical Specifications
D-Link DAP-2660 User Manual
34
Authentication:
Wireless MAC Clone:
MAC Source:
MAC Address:
Select the wireless authentication method to use
here. In the Wireless Client mode, the following
authentication methods are supported: Open
System and WPA-Personal.
For more information about the wireless security,
refer to page 14.
Select the Enable checkbox to enable the wireless
MAC clone option.
After enabling the Wireless MAC Clone option,
the MAC source can be selected. Options to
choose from are Auto and Manual.
After the Manual option was selected as the MAC
Source, click the Scan button to scan for MAC
addresses used by the PC connected to the Web
UI. After the MAC addresses were found, they will
be displayed in the table provided. Selecting one
of the entries will automatically clone the MAC
address into the MAC Address eld. Alternatively,
the MAC address can be entered manually in the
spaces provided.