User's Manual

D-Link DAP-2660 User Manual
78
Trac Control
The uplink/downlink settings allows users to customize the uplink and downlink interfaces including specifying uplink/downlink bandwidth
rates in Mbits per second. These values are also used in the QoS and Trac Manager windows. Once the desired uplink and downlink settings are
nished, click the Save button accept the changes made.
Downlink:
Uplink:
2.4GHz:
5GHz:
Downlink Interface:
Uplink Interface:
Downlink Bandwidth
(1~300):
Uplink Bandwidth
(1~300):
Select this checkbox to congur the download
settings.
Select this checkbox to configure the uplink
settings.
Select this tab to congure the downlink/uplink
settings for the 2.4GHz wireless band.
Select this tab to congure the downlink/uplink
settings for the 5GHz wireless band.
Select the downlink interface(s) that will be
congured here.
Select the uplink interface(s) that will be
congured here.
Enter the downlink bandwidth value here. This
value must be between 1 and 300 Mbps. By
default, this value is 100 Mbps.
Enter the uplink bandwidth value here. This value
must be between 1 and 300 Mbps. By default, this
value is 100 Mbps.
Uplink/Downlink Settings