Quick Installation Guide Access Point This document will guide you through the basic installation process for your new D-Link Business Cloud Wave 2 Access Point DBA-1520P Quick Installation Guide Documentation is also available on the D-Link website
ENGLISH Before You Begin This installation guide provides instructions for installing the DBA-1520P on your network. Additional documentation is also available on the D-Link support website. • Hardware Overview LED Indicators D-Link Nuclias User Manual: For additional information and instructions on how to configure the device using the D-Link Nuclias cloud.
Use one of the following methods to access the web user interface: The DBA-1520P can be powered using one of the following two methods: Connecting through Ethernet Using Power over Ethernet (PoE) 1. Use a standard Ethernet cable to connect the LAN port on the DBA-1520P to a PoE power source device such as a PoE switch or PoE injector. (Optional) Using the power adapter 1. Connect the power connector of the adapter to the power input on the DBA-1520P and plug the adapter into a nearby power outlet.
ENGLISH Mounting the Access Point The DBA-1520P can be mounted on a wall or ceiling for optimal coverage. 4. Align and place the mounting plate on top of the anchors and use the included screws to secure the mounting plate to the surface. Mounting on a Solid Wall or Ceiling 1. (Optional) Attach the included lock plate to the mounting plate using the included screws. Figure 7: Securing the Mounting Plate 5. Connect the Ethernet cable and power adapter (optional) to the device.
ENGLISH 2. Clip the two included ceiling brackets onto the ceiling crossbar. Make sure both brackets are positioned in line with each other. Ceiling crossbar Figure 13: Inserting a Physical Lock Ceiling bracket Figure 10: Attaching the Ceiling Brackets 3. Using the included screws, secure the mounting plate to the ceiling brackets. Reboot/Reset the Access Point If necessary, the DBA-1520P can be manually rebooted or reset to factory default settings.
ENGLISH Appendix - Statements Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
ENGLISH Avertissement: (i) les dispositifs fonctionnant dans la bande 5150-5250 MHz sont réservés uniquement pour une utilisation à l’intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux; (iii) lorsqu’il y a lieu, les types d’antennes (s’il y en a plusieurs), les numéros de modèle de l’antenne et les pires angles d’inclinaison nécessaires pour rester conforme à l’exigence de la p.i.r.e.
ENGLISH Product and Warranty Information To find out more about D-Link products or marketing information, please visit the website http://www. dlink.com. The D-Link Limited Lifetime Warranty information is available at http://warranty.dlink.
Ver. 1.
