Quick Installation Guide Access Point This document will guide you through the basic installation process for your new access point DBA-2820P Documentation is also available on the D-Link website
ENGLISH
• This installation guide provides instructions for installing the DBA-2820P on your network. Additional documentation is also available on the D-Link support website. Hardware Overview • • D-Link Nuclias Access Point Portal Manual: For additional information and instructions on how to configure the device using the D-Link Nuclias cloud. OS X 10.8.5, Windows 7, Linux (Ubuntu 12) and higher. LED Indicators 2.
ENGLISH Interface Connectors (Optional) Using the power adapter 1. Connect the power connector of the adapter to the power input on the DBA-2820P and plug the adapter into a nearby power outlet. 1 2 3 4 5 6 Figure 2: Rear Connectors # Connector 1 2 Power Button Description Used to power the device on and off. Power Input Input for the power adapter. 3 LAN Port 1 (PoE) 4 LAN Port 2 5 Console Port RJ-45 port to connect the RJ-45 console cable for CLI management.
3. When prompted, enter the default login credentials: User name: admin Password: admin Connecting Wirelessly 1. Connect the management computer to the default SSID of the DBA-2820P. The SSID will be in the format DBA-2820P-XXXX where XXXX represents the last 4 characters of the MAC address listed on the device label located on the bottom of the device. 2. Drill holes on the markings and place the included anchors into the drilled holes. 3.
ENGLISH 2. Use the included screws to secure the mounting plate to the ceiling brackets. Troubleshooting 3. Connect the Ethernet cable and power adapter (optional) to the device. The DBA-2820P receives its configuration settings and is managed through the D-Link Nuclias cloud. 4. Attach the DBA-2820P to the mounting plate by placing it onto the plate and rotating clockwise until the device locks into place.
ENGLISH Appendix - Statements ErP Power Usage This device is an Energy Related Product (ErP) that automatically switches to a power-saving Network Standby mode within 1 minute of no packets being transmitted. It can also be turned off through a power switch to save energy when it is not needed. Network Standby: 7.27 watts Switched Off: 0.
ENGLISH IMPORTANT NOTICE: FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 37cm between the radiator and your body. Innovation, Science and Economic Development Canada (ISED) Statement: This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
ENGLISH Japan Voluntary Control Council for Interference Statement This is a Class B product based on the standard of the VCCI Council. If this is used near a radio or television receiver in a domestic environment, it may cause radio interference. Install and use the equipment according to the instruction manual. 電波法により5GHz帯は屋内使用に限ります。 Product and Warranty Information To find out more about D-Link products or marketing information, please visit the website http://www. dlink.com.
NOTES
NOTES
NOTES
NOTES
NOTES
NOTES
Ver. 1.
