Quick Installation Guide

DBA-3621P Quick Installation Guide
1
ENGLISH
Hardware Overview
LED Indicators
Label Area
1 2 3 4
Figure 1: LED Indicators
Note: For the LED positions, please unscrew
the protective cap to line up the device with
the diagram above.
# LED Description
1 LAN (PoE)
Green (Solid) - Link preset
Green (Flashing) - Sending or
receiving packets
2 2.4 GHz
Green (Solid) - Device’s 2.4 GHz
band is operating successfully
Green (Flashing) - Sending or
receiving packets
3 5 GHz
Green (Solid) - Device’s 5 GHz
band is operating successfully
Green (Flashing) - Sending or
receiving packets
4
Power/
Cloud
Green (Solid) - Device operational
and linked to Nuclias Cloud
Green (Flashing) - Device is trying
to connect to Nuclias Cloud
Orange (Solid) - Device booting
up
Orange (Flashing) - Device
undergoing reset procedure
Red (Solid) - Device malfunction
Table 1: LED Description
Before You Begin
This installation guide provides instructions
for installing the DBA-3621P on your network.
Additional documentation is also available on
the D-Link support website.
• Nuclias Cloud Manual: For additional
information and instructions on how to
configure the device using Nuclias Cloud.
Package Contents
This DBA-3621P package includes the following
items:
• DBA-3621P Access Point
• Mounting Plate and Hardware (U-bolts and
nut fasteners, screws and washers)
• Grounding Wire
• Console Cable
• Quick Start Guide
If any of the above items are damaged or
missing, please contact your local D-Link reseller.
Note: To power the unit, use an 802.3af or
802.3at PoE Switch or PoE Injector. This product
is intended to be supplied by a LPS (Limited
Power Source) marked UL Listed Power Unit,
and its output is rated at 48 V DC (PoE), 0.6 A
min., and has a TMA of 60
o
C.
System Requirements
• Computers with Windows®, Macintosh®,
or Linux-based operating systems with an
installed Ethernet Adapter.
• Internet Explorer 11, Safari 7, Firefox 28,
or Google Chrome 33 and above (for
configuration).