Quick Installation Guide Access Point This document will guide you through the basic installation process for your new access point DBA-X2830P Documentation is also available on the D-Link website
ENGLISH Before You Begin • This installation guide provides instructions for installing the DBA-X2830P on your network. Additional documentation is also available on the D-Link support website. Hardware Overview • • D-Link Nuclias Access Point Portal Manual: For additional information and instructions on how to configure the device using the D-Link Nuclias cloud. OS X 10.8.5, Windows 7, Linux (Ubuntu 12) and higher. LED Indicators 2.
(Optional) Using the power adapter 1. Connect the power connector of the adapter to the power input on the DBA-X2830P and plug the adapter into a nearby power outlet. 1 2 3 4 5 6 Figure 2: Rear Connectors # Connector 1 2 Power Button Description Used to power the device on and off. Power Input Input for the power adapter. 3 LAN Port 1 (PoE) 4 LAN Port 2 5 Console Port RJ-45 port to connect the RJ-45 console cable for CLI management.
ENGLISH 2. Open a web browser and type in the default host name of the DBA-X2830P and press Enter. The default host name is DBA-X2830P-XXXX where XXXX represents the last 4 characters of the MAC address listed on the device label located on the bottom of the device. 3. When prompted, enter the default login credentials: User name: admin Password: admin Connecting Wirelessly 1. Connect the management computer to the default SSID of the DBA-X2830P.
Troubleshooting 3. Connect the Ethernet cable and power adapter (optional) to the device. The DBA-X2830P receives its configuration settings and is managed through the D-Link Nuclias cloud. 4. Attach the DBA-X2830P to the mounting plate by placing it onto the plate and rotating clockwise until the device locks into place. Locking the DBA-X2830P Attach a Kensington physical security lock to the Kensington slot on the side of the device to secure it to an object.
ENGLISH Appendix - Statements ErP Power Usage This device is an Energy Related Product (ErP) that automatically switches to a power-saving Network Standby mode within 1 minute of no packets being transmitted. It can also be turned off through a power switch to save energy when it is not needed. Network Standby: 7.27 watts Switched Off: 0.
ENGLISH IMPORTANT NOTICE: FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. Innovation, Science and Economic Development Canada (ISED) Statement: This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
ENGLISH Japan Voluntary Control Council for Interference Statement This is a Class B product based on the standard of the VCCI Council. If this is used near a radio or television receiver in a domestic environment, it may cause radio interference. Install and use the equipment according to the instruction manual. 電波法により5GHz帯は屋内使用に限ります。 Product and Warranty Information To find out more about D-Link products or marketing information, please visit the website http://www. dlink.com.
NOTES
NOTES
NOTES
NOTES
NOTES
NOTES
Ver. 1.
