DCH-G02 ; D-Link Corporation DCH-G020; 6PDUW Home Hub User’s Manual Version 01.0 Oct.
DCH-G020; D-Link Corporation 1. PRODUCT DESCRIPTION The DCH-G020 is a Connected Home Z-Wave Gateway used to control a variety of Z-wave home sensors for the application of home automation. It is able to talk to variety of Z-Wave sensors and communicate with other DLink connected Home devices. 2. APPEARANCE Front Panel l LED: Status indicator Rear Panel l USB port (Type A): reserved for future support .
DCH-G020; D-Link Corporation l Power jack: 5V/2A Bottom Panel l Reset button 3. APPLICATIONS 4. INSTALLATION & CONFIGURATION Step 1 Make sure your mobile device connected to the same network as DCH-*020; Step 2 Follow the Quick Install Card to scan the QR code to download the App. Step 3 Install App and run it. Step 4 Register an account for mydlink home service and login the App.
DCH-G020; D-Link Corporation Step 5 Add a new device and select Gateway DCH-G020;. A. Select Add new device to add a new device. B. Scan device QR code or skip the QR code to manual select the device.
DCH-G020; D-Link Corporation Step 6 Follow the instructions to setup the DCH-G020; Manual Page 5 10/16/2014
DCH-G020; D-Link Corporation Step 7 Find the DCH-G020; and click to select it. Step 8 Enter the Pin Code of your DCH-G020;.
DCH-G020; D-Link Corporation Step 9 Give a name of your DCH-G020;. Step 10 See a DCH-G020; on the device list, then you can continue to add Z-wave sensors or other D-Link Connected Home devices.
DCH-G020; D-Link Corporation Click the device to see more information of the device.
DCH-G020; D-Link Corporation Make a Group for Devices You can click the Notification to see the triggered information, click Schedule to configure the device working schedule, and click Sign out to log out the device.
FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
IC Statement This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Ce dispositif est conforme à la norme CNR-210 d'Industrie Canada applicable aux appareils radio exempts de licence.
