D-Link Version: 0.
Table of Contents Table of Contents Product Overview ........................................................ 3 Package Contents ................................................... 3 System Requirements ............................................. 4 Introduction .............................................................. 5 Features .................................................................. 6 Hardware Overview ................................................. 7 Connections ......................
Section 1 - Product Overview Package Contents D-Link DCH-S150 WiFi Motion Sensor D-Link DCH-S150 User Manual 3
Section 1 - Product Overview System Requirements Network Requirements App-based Configuration Device Requirements D-Link DCH-S150 User Manual IEEE 802.11b/g/n wireless clients Operating System: iOS6/7 or above Android 4.0/4.2 or above.
Section 1 - Product Overview Introduction Automate your connected home devices wirelessly using a PIR motion detection sensor with the D-Link DCH-S150 Motion Detection Sensor. Simply connect it to your wireless network at a touch of a button and it will trigger devices connected to a D-Link SmartPlug any time motion is detected. No matter if it’s a lamp or a fan, with the DCH-S150, you can automatically trigger devices plugged to wirelessly-connected D-Link SmartPlugs throughout your home.
Section 1 - Product Overview Features Compatible with 802.11b/g and 802.11n Devices - The DCH-S150 is fully compatible with the 802.11b/g/n standards. WPS PBC - (Wi-Fi Protected Setup Push Button Configuration) Push Button Configuration is a button that can be pressed to add the device to an existing network or to create a new network. A virtual button can be used on the utility while a physical button is placed on the side of the device.
Section 1 - Product Overview Hardware Overview Connections Motion Sensor D-Link DCH-S150 User Manual 7
Section 1 - Product Overview Hardware Overview Side Status LED WPS button Reset button D-Link DCH-S150 User Manual 8
Section 2 - Installation Installation Connecting the WiFi Motion Sensor It is easy to connect the D C H -S150 s i m p l y by performing the following instructions: 1. Plug the DCH-S150 into the wall outlet/socket, then follow App user guide.
D-Link DCH-S150 User Manual 1 0
Appendix A - Technical Specifications Technical Specifications DEVICE INTERFACES • 802.11n WLAN (AP wireless connection to computers) • Common connect button • Reset button WIRELESS LAN • 802.11b/g standards • 802.11n standard • Wireless speed: up to 300 Mbps (802.11n) • 64/128-bit WEP data encryption • WPA/WPA2 (Wi-Fi Protected Access) ADVANCED FEATURES • IPv6 support OPERATION MODES • AP 2.4 GHz DIMENSIONS • 58 x 54 x 42.85 mm WEIGHT • 80 grams (0.
Appendix A - Technical Specifications Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Appendix C - Technical Specifications Industry Canada statement: This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Ce dispositif est conforme à la norme CNR-210 d’Industrie Canada applicable aux appareils radio exempts de licence.
