Version 0.
Table of Contents Table of Contents Product Overview ........................................................ 3 Package Contents ................................................... 3 System Requirements ............................................. 4 Introduction .............................................................. 5 Features .................................................................. 6 Hardware Overview ................................................. 7 Connections ......................
Section 1 - Product Overview Package Contents D-Link DCH CH-S150 mydlinkTM Wi-Fi Fi Motion Sensor D-Link DCH-S150 User Manual 3
Section 1 - Product Overview System Requirements Network Requirements App-based Configuration Device Requirements D-Link DCH-S150 User Manual • IEEE 802.11b/g/n wireless clients Operating System: • iOS6/7 or above • Android 4.0/4.2 or above.
Section 1 - Product Overview Introduction The DCH-S150 WiFi Motion Sensor is ideal for home or office wireless networks that require very fast Internet connections. The DCH-S150 The motion sensor is powered by a 100-240V AC Power Supply and is designed to detect movement up to 8M away with a cone coverage of approximately 84 degrees wide. The DCH-S150 supports WiFi 802.11 b/g/n networking, and through a App which iOS or Android system for you can control at home or office.
Section 1 - Product Overview Features • Compatible with 802.11b/g and 802.11n Devices - The DCH-S150 is still fully compatible with the 802.11b/g/n standards. • WPS PBC - (Wi-Fi Protected Setup Push Button Configuration) Push Button Configuration is a button that can be pressed to add the device to an existing network or to create a new network. A virtual button can be used on the utility while a physical button is placed on the side of the device.
Section 1 - Product Overview Hardware Overview Connections Motion Sensor D-Link DCH-S150 User Manual 7
Section 1 - Product Overview Hardware Overview Side Power LED WPS Button Rest Button D-Link DCH-S150 User Manual 8
Section 2 - Installation Installation Connecting the WiFi Motion Sensor It is easy to connect the D C H -S150 s i m p l y by performing the following instructions: 1. Plug the DCH-S150 into the wall outlet/socket, then follow App user guide.
D-Link DCH-S150 User Manual 1 0
Appendix C - Technical Specifications Technical Specifications DEVICE INTERFACES • 802.11n WLAN (AP wireless connection to computers) • Common connect button • Reset button WIRELESS LAN • 802.11b/g standards • 802.11n standard • Wireless speed: up to 300 Mbps (802.11n) • 64/128-bit WEP data encryption • WPA/WPA2 (Wi-Fi Protected Access) ADVANCED FEATURES • IPv6 support OPERATION MODES • AP 2.4 GHz DIMENSIONS • 58 x 54 x 42.85 mm WEIGHT • 80 grams (0.
Appendix C - Technical Specifications Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Appendix C - Technical Specifications Industry Canada statement: This device complies with RSS-247 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Ce dispositif est conforme à la norme CNR-247 d'Industrie Canada applicable aux appareils radio exempts de licence.
