User manual

25D-Link DCS-933L User Manual 25
Section 3 - Conguration
Wireless Setup
Check this box to allow your camera to connect to your network
wirelessly.
Enterthenetworkname(SSID)ofthewirelessnetworkyouwant
to connect to. You can also click the Site Survey button below to
choose an available network and ll in settings automatically.
If you are using Ad-Hoc as your connection mode, select the same
channel that is being used by your wireless network.
Select the connection mode used by your wireless network. In most
cases, you should select Infrastructure. Ad-Hoc is only used if your
camera is directly connecting to another PC or device.
Clicking this button will allow you to select an available wireless
network to connect to, and will ll in the necessary settings for you.
Select the wireless security mode used by your wireless network. If
youselectWEPorWPA-PSK/WPA2-PSK,enterthepasswordforyour
wireless network in the text box that appears.
Enable
Wireless:
SSID:
Channel:
Connection
Mode:
Site Survey:
Wireless
Security Mode:
This section allows you to set up and congure the wireless settings on your camera.