User's Manual

16D-Link DCS-8302LH User Manual

Section 3 - mydlink

1 Device Name Tap to change the device’s name.

2 Privacy Mode Tap to enable. Privacy mode will disable the camera feed.

Motion and Person

Detection

Tap to set the Motion and Person Detection area and sensitivity settings.

4 Siren Timeout

Set the auto-off timer for the siren. This setting will apply to manual

operation and Automations.

5 Storage

Tap to change the video clips storage location from the microSD card to the

cloud. You can also subscribe to mydlink Cloud from here and view your

current subscription plan.

6 Camera Microphone

Tap to enable or disable picking up sound near your camera in live view

and recordings.

7 Night Vision Tap to change night vision detection to On, O or Auto.

8 Anti-Flicker

Reduces icker in the video. Tap 50 Hz or 60 Hz depending on the frequency

of your lights.

9 Invert Image Enable this to invert the camera view.

10 Status LED Disabling this will turn o the LED until you turn it back on.

11 Designated Contact

Tap here to add, remove, or edit designated contacts that appear in the

rich notication.

12 Wi-Fi

Tap to change the wireless network this device will use to connect

to the Internet. Note: The network must be the same as all your

other mydlink devices that you wish to use the same account for.

13 Time Zone Select the time zone to calibrate your device to.

14 Firmware

This displays the installed version of the rmware on your device. Tap to enter

the update settings. You can choose the most suitable time for automatic

updates.

15 ONVIF

Tap to enable ONVIF to allow ONVIF-compatible devices to manage the

camera.

16 MAC ID Identies the device for support issues.

17 Restart Device Tap this button to restart the device.

18 Remove Device Tap this button to disconnect this device from your mydlink account.